Second Cooking Step Deactivation; Starting/Stopping The Cooking Cycle - TECNOEKA TOUCHSCREEN MKF D1T Original Operating And Instruction Manual

To confirm your choice, tap t h e i c o n ( i n g r e e n )
appear. By tapping the icon (in clear text)
confirm it by tapping t h e i c o n ( i n g r e e n )
"ph 2/2" option ( SECOND cooking step), for which the operating parameters and relative values can be set
(follow the indications given in the dedicated paragraphs and illustrated above) .
The transition from the FIRST to the SECOND cooking step is indicated by an acoustic signal ("beep").
After 30 seconds the summary screen returns to highlight (automatically) the configuration of the FIRST
cooking step
To stop the setting procedure and return to the initial values, tap the icon (in red)
at least 45 seconds.
The "Expert" screen also has the options: "Internal values" and "Alarms" which are not operating options,
but only demonstrative; since if activated by tapping t h e i c o n ( i n g r e e n )
functional status of the oven (the type of operating parameter active and the relative set value, as well as
any faults present) .
Warnings
The SECOND cooking step is only activated if the "Time" parameter has also been set.
An acoustic signal ("beep") confirms the passage from the FIRST to the SECOND cooking step.

2.8.6 SECOND cooking STEP deactivation

The SECOND cooking step ("ph 2/2") can be deactivated (with active display) if the new cooking cycle does
not foresee it.
Touch the symbol for at least 3 seconds: the "Expert" screen appears.
By tapping the icon (in clear text)
To confirm your choice, tap t h e i c o n ( i n g r e e n )
activate the cancellation of the cooking step, tap t h e i c o n a g a i n ( i n g r e e n )
screen returns.
Tapping the icon (in red)
Warning
The SECOND cooking step can only be deactivated if no timed cooking is in progress.

2.8.7 Starting/stopping the cooking cycle

The cooking cycle refers to the set time (section 2.8.1). After setting the other parameters and their values,
simply tap the symbol and the cycle is activated.
The countdown of the set time is started, and the display shows the message (in red) "COOKING". At the
end of the countdown, the message (in green) "END" and a beep confirm that the cooking cycle has
ended for the set time.
The oven will however continue to operate with the set parameters (excluding the "Time" parameter).
Operation can be stopped by touching the symbol for at least 3 seconds
To interrupt an active cooking cycle, touch the symbol
"READY" (in green). However, the oven continues to operate with the set parameters (excluding the
"Time" parameter). Operation can be stopped by touching the symbol for at least 3 seconds
Warning
To start a cooking cycle, the "Time" parameter must also be set.
11
: the summary screen appears showing (in yellow) the
the option "Delete step" (written in green) can be selected.
makes it possible to return to the summary screen.
: the other options of the "Expert" screen
select the "ph 2/2"option (written in green), and
: the message appears : "Delete step 2?" To
for at least 1 second: the display shows
; otherwise, wait
, they highlight the
: the "Expert"
.
.