Download Print this page

Aiwa CX-NA222 Operating Instructions Manual page 10

For nsx-a222 and nsx-a223
Hide thumbs Also See for CX-NA222:

Advertisement

Available languages

Available languages

PLAYING DISCS
CD EDIT CHECK
I DISC DIRECT PLAY
Load discs.
CLOSE
LOADING DISCS
Press CD, then press A OPEN/CLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
To
dav one or two discs,
place the discs on tray 1 and 2.
To dav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
Tray 1
DISC C"HANGE
Tray number of the
Total number of
Total playing time
tracks
To play all
discs in
the disc compartment,
press
Play begins with the disc on tray 1.
Number of track
Elapsed playing
being played
time
To play one
disc only, press DISC DIRECT PLAY
The selected disc is played once.
b.
1-3.
To stoD Dlav, mess 9.
To pause piay, press II. To resume play, press again.
To search for a particular point during playback, keep +
or -
pressed and release it at the desired point,
To skip to the beginning
of a track during playback,
press
-
or -
repeatedly or turn MULTI JOG.
To remove discs, press A OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When A OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press CD EDIT/CHECK while pressing SHIFT on
the remote control. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a
track with the remote control
1 Press DISC DIRECT PLAY 1-3 to select a disc.
2 Press numbered buttons O-9 and +1O to select a track.
Example:
To select the 25th track, press +1O, +1O and 5.
To select the 10th track, press +1O and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1
Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press A OPEN/CLOSE to close the disc compartment.
m
When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions,
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
i
()
ENGrL/SH

Advertisement

loading

This manual is also suitable for:

Nsx-a222Nsx-a223