Denon AVR-3311 Owner's Manual page 91

ENGLISH
Manual Setup
Setting items
GUI TUNER : Set the tuner screen display time when the input source is
(Continued) "SIRIUS" or "HD Radio".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
iPod : Set the iPod screen display time when the input source is "DOCK"
or "iPod (USB)".
• Always : Show display continuously.
• 30sec : Show display for 30 seconds after operation.
• 10sec : Show display for 10 seconds after operation.
• OFF : Turn display off.
Remote Preset Codes See "Registering preset codes" (vpage 91).
Search a preset code to
register in the remote
control unit.
Quick Select Name • Up to 16 characters can be input.
Change the "Quick Select" • For character input, see page 65.
display title to one you
prefer.
Zone Rename • Up to 10 characters can be input.
Change the display title of • For character input, see page 65.
each zone to one you prefer.
Trigger Out Trigger Out 1 / Trigger Out 2
Select the condition for
n When setting for zone (MAIN ZONE / ZONE2 / ZONE3)
activating Trigger Out 1/2 for
Trigger out is activated through linkage to the power of the zone set
the input source, surround
to "ON".
mode, etc.
n When setting for input source
See "TRIGGER OUT jacks"
Activate trigger out when the input source set to "ON" is selected.
(vpage 23) for more
information on trigger out.
n When setting for surround mode
Activate trigger out when the surround mode set to "ON" is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "ON" is selected.
• ON : Activate trigger on this mode.
• – – – : Do not activate trigger on this mode.
88
Remote control operation
buttons
Setting details
Active for the zone set to "ON" with "When Setting for Zone".
Active when the "MAIN ZONE" set to "ON" with "When Setting
for Zone" is selected, and when the input source set to "ON" with
"When Setting for Input Source" is selected.
Activate trigger out when the HDMI monitor set to "ON" is
selected. Active when the "MAIN ZONE" set to "ON" with
"When Setting for Zone" is selected, and when the input source
set to "ON" with "When Setting for Input Source" is selected.
Move the cursor
(Up/Down/Left/Right)
Setting items
Trigger Out Default : The "Trigger Out" settings are returned to the default settings.
(Continued) • Yes : Reset to the defaults.
• No : Do not reset to the defaults.
Remote ID Setup 1 / 2 / 3 / 4
Set when you operate
NOTE
another DENON AV
amplifier with the remote When using this unit with only the included main remote control unit (RC-
1146), use Remote ID "1" (default).
control unit of this unit.
When using the included sub remote control unit (RC-1148), this function
Match the remote control
unit you are using with the can be used. Match the ID setting of the remote control unit and the
remote ID of this unit. receiver.
Dimmer Bright : Normal display brightness.
Adjust the display Dim : Reduced display brightness.
brightness of this unit. Dark : Very low display brightness.
OFF : Turns the display off.
Setup Lock ON : Turn protection on.
Protect settings from OFF : Turn protection off.
inadvertent change.
When canceling the setting, set "Setup Lock" to "OFF".
NOTE
When "Setup Lock" is set to "ON", the settings listed below can no
longer be changed. Also, "SETUP LOCKED!" is displayed if you attempt
to operate related settings.
· Menu operations
· RESTORER
· Dynamic Volume™
Maintenance Mode
NOTE
Use when receiving
Only use this function if so instructed by a DENON serviceperson or
maintenance from a DENON
installer.
service engineer or custom
installer.
Confirm the setting
Setting details
· Channel Level
· MultEQ ® XT
· Dynamic EQ ®
Return to previous menu