Denon AVR-3311 Owner's Manual page 80

n A-DSX Soundstage
Adjust Audyssey DSX™ setting and sound stage parameters.
Setting items
Audyssey DSX ON-Height- : Turn on A-DSX processing for height
Provides more immersive expansion.
surround sound by adding ON-Wide- : Turn on A-DSX processing for wide
the new channels. expansion.
OFF : Do not set Audyssey DSX.
• This can also be set by pressing
remote control unit or press
the main unit.
• The
Stage Width –10 – +10 (0)
Adjust sound stage width
when using front wide
speakers.
Stage Height –10 – +10 (0)
Adjust sound stage height
when using front height
• "Audyssey DSX" can be set when you are using front height speakers
speakers.
or front wide speakers.
• "Audyssey DSX" is only valid when using a center speaker.
• "Audyssey DSX" is valid when surround mode is STANDARD mode
other than PLgz Height.
• "A-DSX Soundstage" cannot be configured if the HD Audio source being
played includes Front height and Front wide channels. In this case, the
respective channels are played back using the input signals.
About Audyssey Dynamic Surround Expansion (A-DSX)
Audyssey DSX is a scalable surround expansion system that adds
new channels to improve the surround impression. Based on research
in human hearing Audyssey DSX adds a pair of Wide channels in the
front because that information is critical in the rendering of a realistic
soundstage.
Audyssey DSX then adds a pair of Height channels above the main
front channels to reproduce the next most important acoustical and
perceptual cues related to soundstage depth. In addition to creating
these new channels, Audyssey DSX applies Surround Envelopment
Processing to enhance the blend between the front and side/back
surround channels. The result is a much more seamless and enveloping
home theater experience.
Remote control operation
buttons
Default settings are underlined.
Setting details
A-DSX
on the
AUDYSSEY DSX
on
indicator illuminates on the display.
Audyssey DSX : ON -Height-
OFF Audyssey DSX : ON -Wide-
Move the cursor
(Up/Down/Left/Right)
n Manual EQ
Use the graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ XT" setting (vpage 75) is "Manual"
Setting items
q Select the speaker tone adjustment method.
Adjust CH
Correct the tone of each All : Adjust the tone of all speakers together.
speaker.
L/R : Adjust the tone of left and right speakers together.
Each : Adjust the tone of each speaker.
w Select the speaker.
e Select the adjustment frequency band.
63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
• Select the speakers you want to adjust when "L/R" or "Each" is
selected.
r Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Base Curve Copy Yes : Copy.
Copy "Audyssey Flat" curve No : Do not copy.
from MultEQ ® XT.
"Base Curve Copy" is displayed after Audyssey ® Auto Setup has
been performed.
Default Yes : Reset to the defaults.
The "Manual EQ" settings No : Do not reset to the defaults.
are returned to the default
settings.
Confirm the setting
ENGLISH
Audio/Video Adjust
Default settings are underlined.
Setting details
77
Return to previous menu