Setting Asb (Auto Standby); Line 2 Output With A Fixed Volume - Onkyo P-3000R Instruction Manual

Setting ASb (Auto Standby)

Display Off LED
#, $
ENTER
SETUP
When ASb is turned on, the preamplifier will
automatically enter Standby mode if there is no operation
for 30 minutes with no audio signal input.
1 Press SETUP.
2
Press #/$ to select "ASb".
3 Press ENTER.
4
Press #/$ to switch between "ASb ON" and
"ASb OFF".
ASb ON:
ASb enabled.
ASb OFF:
ASb disabled.
Default setting: ASb ON (European models),
ASb OFF (North American models)
5 Press ENTER.
"FINISH" appears on the display.
You can also use preamplifier's MODE and Multi jog dial.
See "Using MODE button" to perform this procedure on
the preamplifier (➔ 29).
Once the ASb function has been activated, the
preamplifier will not automatically turn on even if it
receives the signal. To turn on the preamplifier, press
ON/STANDBY manually.
Note
• When the set ASb starts running, the power of the Onkyo Dock
connected via RI is automatically turned off (➔
• The preamplifier will cancel the setup if there is no operation for
8 seconds.
• Before entering standby mode with the ASb function, the
Display Off LED flashes 30 seconds before the ASb function
starts running.

LINE 2 Output with a Fixed Volume

#, $
ENTER
SETUP
Switch L2 OUT to enable the volume adjustment from
another component connected to the preamplifier.
1 Press SETUP.
2
Press #/$ to select "L2 OUT".
3
Press ENTER.
4
Press #/$ to switch between "NORMAL" and
"THROUGH".
NORMAL:
You can adjust the PRE OUT volume by the
preamplifier's volume controller when the signal
coming from the LINE 2 IN is output from the
PRE OUT.
THROUGH:
The PRE OUT output of the preamplifier is
fixed.
5 Press ENTER.
"FINISH" appears on the display.
You can also use preamplifier's MODE and Multi jog dial.
32).
See "Using MODE button" to perform this procedure on
the preamplifier (➔
Note
• The preamplifier will cancel the setup if there is no operation for
8 seconds.
• To check the connection in which this setting is enabled, see
"Using Stereo Speakers as the Front Speakers for Your Surround
Sound System" (➔
• When plugging other components such as compact disc players
into the LINE 2 jack, change the "L2 OUT" setting to
"NORMAL".
29).
23).
En
35