Denon AVR-391 Owner's Manual page 13

ENGLISH
5
Play back disc
Press to switch an input source
BD
1
for a player used for playback.
Play the component connected to
2
this unit.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
Adjust the sound volume.
3
VOL d ··········································· Volume up
VOL f ······································ Volume down
MUTE ·················································· Muting
Set the listening mode.
4
Set the listening mode according to the
playback contents (cinema, music, etc.)
or according to your liking (vpage 21
"Selecting a listening mode (Surround
mode)").
10
When power is switched to standby
POWER OFF
Press .
GPower indicator status in standby modeH
• Normal standby : Off
You can also switch the power to standby by
ON/STANDBY
pressing on the main unit.
NOTE
During power standby, a minimal amount of power is consumed. To
totally cut off the power, remove the power cord from the power
outlet.
1 2 3 4 5