Creative EMU10K1 - Sound Blaster Live! Value User Manual page 44

An effect's parameters and values
appear in the Parameter list of the
Edit Effect Parameters dialog. To
open the dialog, double-click the
effect in the Effects list.
• To remove an effect from the environment:
Select the effect and click the Remove button.
3. Repeat Step 2 until you are satisfied with the configuration. Then, save the settings into the current
environment or, in the case of a default environment, save the settings as a new environment by
typing a new name or the name of an existing custom environment in the Environment box, and
click the Save button.
If you do not want to save the environment, click the Delete button.
On the Source tab page, you can set the amount of the effects to apply on an audio source.
If the Always Save Settings Automatically check box on the Options tab page is selected, your revised
settings are saved when you quit the Environmental Audio control utility. You cannot return an
environment to its original settings unless you clear this check box.
To change the amount of the effects for an audio
source:
1. In the Environmental Audio Control dialog, click
the Source tab.
2. In the Select Source box, click the source whose
effect amount you want to change.
3. To change the amount of an effect to apply to the
source, select the effect and move the Amount
slider to the left or right. The amount is reflected
in the Amount column of the Effects list.
4. Repeat steps 2 and 3 for each audio source you
want to configure.
5. When you are satisfied with the configuration,
save the settings into the current environment or,
in the case of a default environment, save the settings as a new environment by typing a new name
or the name of an existing custom environment in the Environment box, and click the Save button.
If you do not want to save the new environment, click the Delete button.
2
1
Using Sound Blaster Live! Value 30