Special Effects - Creative EMU10K1 - Sound Blaster Live! Value User Manual

Special Effects

Wave Studio allows you to create new sounds by adding one or more of the following special effects
from the Special menu:
❐ Adjust Volume: Allows you to change the volume of wave files.
❐ Echo: Modifies sound to produce echoing.
❐ Fade-In/Fade-Out: Creates a fading in (soft to loud) or fading out (loud to soft).
❐ Insert Silence: Inserts a pause between sounds.
❐ Invert Waveform: Turns the wave form over along its horizontal axis. For stereo files, you can
either invert both channels, the left channel, or the right channel.
❐ Mute: Silences a selected portion of a wave file. For stereo files, you can either mute both
channels, the left channel, or the right channel.
❐ Pan: Moves the sound from the left channel to the right channel. This effect applies only to
stereo files.
❐ Phase Shift: Applies a delay on wave playback in the selected channel a a specified amount of
time or sammples. This effect applieds only to stereo files.
❐ Rap: Repeats a portion of the wave file, creating a jerky or stuttering effect to voice recordings.
❐ Reverse: Changes the sequence of data so that the sound is played backward.
❐ Swap Channels: Exchanges the entire or selected portion of wave data between the left and the
right channels. This effect applies only to stereo files.
Most effects can be applied to:
❐ Entire file by placing the cursor at the beginning of the file or not placing the cursor on the wave
data.
❐ Selected portion of the file by using the cursor to select the section.
❐ Section of the file starting at the cursor position to the end.
Using Sound Blaster Live! Value 37