Installing The Creative Software; Windows 95 - Creative EMU10K1 - Sound Blaster Live! Value User Manual

Installing the
Creative Software

Windows 95

This manual reflects a software
installation in an unmodified
version of the operating system.
Your installation screens and
procedure may vary slightly from
what is shown and described. The
variations may be caused by other
software/hardware installed on
your computer, or the version of
the Windows 95 operating system.
If the Sound Blaster software
installation screen appears, click
on Exit. You must install the audio
card drivers before insalling the
applications.
The Sound Blaster Live! Value software contains drivers necessary for operation and utilities to make
the most of the audio card. The software installation varies according to your computer's operating
system:
❐ Windows 95
❐ Windows 98
❐ Windows NT
When you turn on your computer, Windows 95 automatically detects the new hardware, and prompts
you for the software installation disk. The installation may vary from the instructions below based upon
previously installed software and hardware.
To install in Windows 95:
1. Turn on your computer for Windows
95 to automatically detect your new
hardware. The New Hardware Found
dialog appears.
2. Select the Driver from disk provided
by hardware manufacturer option,
and click OK. The Install From Disk
dialog appears.
3. Insert Sound Blaster Live! Value
Disk 1 into your CD-ROM drive.
Enter the path for your CD-ROM
drive and the software on the disk.
For example, use the Browse button
to locate, or type, the following:
1
2
3
Installing Sound Blaster Live! Value 9