Creative EMU10K1 - Sound Blaster Live! Value User Manual page 23

Double-click the My Computer
icon on your desktop, right-click
your CD-ROM drive icon, and
click on AutoPlay to start the
Creative audio software install if
the CD is in the drive.
You must install the Creative
Sound Blaster Live! Value
software in order to use the audio
card effectively.
D:\AUDIO\ENGLISH\WIN95DRV (D:\ represents your CD-ROM drive). Click OK to install
the Windows 95 drivers.
4. If prompted, install the gameport/joystick drivers from the installation CD. For example, use the
Browse button to locate, or type, the following: D:\DIRECTX\DIRECTX\DRIVERS\USA.
Click OK to install the gameport/joystick drivers. (If you are not prompted and want to install the
gameport/joystick drivers, click Start on the Taskbar, select Settings and Control Panel. Double-
click the Install New Hardware icon. Follow the on-screen instructions—select to NOT search for
new hardware and, then, select Sound, Video and Game Controllers. Then, select Have Disk to
locate the file you want as described above.)
5. You may be prompted to restart your computer—restart your computer for the drivers to take
effect.
NOTE: When your computer attempts to restart Windows 95, it may take up to six minutes to
update the system settings. DO NOT RESET your computer even though there does not seem to
be any hard disk activity.
6. If Autorun is enabled and the
Sound Blaster Live! Value Disk 1
is in the drive, the Creative
Software Installation screen
appears. The software included
with your Sound Blaster Live!
Value is listed on the screen.
Select Creative Sound Blaster
Live! Value software and any
other applications that you want to
install and click on OK.
6
Installing Sound Blaster Live! Value 10