Sound Graph - Creative EMU10K1 - Sound Blaster Live! Value User Manual

Sound Graph

Creative Sound Graph complements the Record Control view of Creative Mixer by giving a
graphical view of the sounds mixed for recording.
There are three display modes:
❐ VU Display Mode
displays the playback signal levels of the left and right channels.
❐ Scope Display Mode
displays the amplitude-to-time relationship between the playback signals.
❐ Spectrum Display Mode
Logarithmic spectrum displays the normal frequency spectrum of the recording signal in
logarithmic form, that is, non-linear. The frequency bands are 250 Hz, 375 Hz, 750 Hz, 1 kHz, 2
kHz, 3 kHz, 4 kHz, 6 kHz, 8 kHz, 10 kHz, 12 kHz, 14 kHz, 16 kHz, and 18 kHz.
Fine grain spectrum displays the normal frequency spectrum of the reocrding signal linearly. Its
range is 160 Hz to 12 kHz, with a frequency interval of about 86 Hz, and is very detailed. (This
mode is the fine grain version of the spikes spectrum mode.)
Spikes spectrum displays the normal frequency spectrum linearly. Its range is 160 Hz to 12 kHz,
with a frequency interval of about 86 Hz, and is very detailed. (This mode is the spikes version of
the fine grain spectrum mode.)
Double-click the center of Creative Sound Graph to switch to the next display mode.
Click the buttons labeled 1, 2 or 3 on Creative Sound Graph to switch to the Logarithmic Spectrum
Mode, Spikes Spectrum Mode, or Fine Grain Spectrum Mode, respectively.
Using Sound Blaster Live! Value 23