Stairville Compact LED Bar CLB8 User Manual
  1. Manuals
  2. Brands
  3. Stairville Manuals
  4. DJ Equipment
  5. Compact LED Bar CLB8
  6. User manual

Stairville Compact LED Bar CLB8 User Manual

Led lighting set
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Compact LED Bar CLB8
LED Lighting Set

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Compact LED Bar CLB8 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stairville Compact LED Bar CLB8

Summary of Contents for Stairville Compact LED Bar CLB8

  • Page 1 Compact LED Bar CLB8 LED Lighting Set...
  • Page 2 Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.05.2024, ID: 333919 (V7)

  • Page 3: Table Of Contents

    7.4 Functions in 2-channel DMX mode................... 37 7.5 Functions in 4-channel DMX mode................... 38 7.6 Functions in 18-channel DMX mode..................39 Technical specifications........................41 Plug and connection assignments....................44 Troubleshooting............................45 Cleaning............................... 47 Compact LED Bar CLB8 LED Lighting Set...
  • Page 4 Table of contents Protecting the environment......................48 Compact LED Bar CLB8 LED Lighting Set...
  • Page 5 Compact LED Bar CLB8 LED Lighting Set...

  • Page 6: General Information

    1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. Compact LED Bar CLB8 LED Lighting Set...
  • Page 7 Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Compact LED Bar CLB8 LED Lighting Set...
  • Page 8 General information Warning signs Type of danger Warning – danger zone. Compact LED Bar CLB8 LED Lighting Set...

  • Page 9: Safety Instructions

    Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervi‐ sion. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with. Compact LED Bar CLB8 LED Lighting Set...
  • Page 10 Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames. Compact LED Bar CLB8 LED Lighting Set...
  • Page 11 Possible damage due to leaking batteries! Batteries can leak and cause permanent damage to the device. Take the batteries out of the device if it is not going to be used for an extended period of time. Compact LED Bar CLB8 LED Lighting Set...
  • Page 12 The unit emits electromagnetic radio signals. Overlapping radio waves may cause interference with the device and other devices. Do not use the device in locations where the use of wireless devices is prohibited. Compact LED Bar CLB8 LED Lighting Set...

  • Page 13: Features

    For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness. Compact LED Bar CLB8 LED Lighting Set...

  • Page 14: Installation

    When installing and operating, make sure to follow the standards and regulations that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. Compact LED Bar CLB8 LED Lighting Set...
  • Page 15 Make sure that illuminated surfaces are more than 2 m away. Do not operate the device in ambient temperatures above 40 °C. Always ensure sufficient ventilation at the operating location. Compact LED Bar CLB8 LED Lighting Set...
  • Page 16 If the DMX connections are wired incorrectly, this can cause errors during the data transfer. Do not connect the DMX input and output to audio devices, e.g. mixers or ampli‐ fiers. Use special DMX cables for the wiring instead of normal microphone cables. Compact LED Bar CLB8 LED Lighting Set...
  • Page 17 Locking screw for securing the spots on the T-bar and for horizontal orientation (beam direction). Threads for attaching additional effects units or for hanging using the C-hooks. Electrical connection of the spot on the T-bar (pre-mounted). Compact LED Bar CLB8 LED Lighting Set...
  • Page 18 36-mm flange for mounting the T-bar on a stand. 6.35-mm jack socket for connecting the foot switch unit. Receiving antenna for the signals of a wireless foot switch. Please note that this device must not be connected to a dimmer. Compact LED Bar CLB8 LED Lighting Set...
  • Page 19 Possible damage due to leaking batteries! Batteries can leak and cause permanent damage to the device. Take the batteries out of the device if it is not going to be used for an extended period of time. Compact LED Bar CLB8 LED Lighting Set...

  • Page 20: Starting Up

    This equipment uses a frequency range that is free of charge and registration within the European Union. For more information, please visit: http://www.thomann.de. Make sure that no metal objects are located between transmitter and receiver. Avoid interference by other radio and in-ear systems. Compact LED Bar CLB8 LED Lighting Set...
  • Page 21 If the dot behind the first character of the display is flashing in the DMX mode, no DMX signal is received. Maybe the DMX controller is not switched on or there is a cabling error. If the indi‐ cator lights permanently, the device receives a valid DMX signal. Compact LED Bar CLB8 LED Lighting Set...
  • Page 22 Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on. Compact LED Bar CLB8 LED Lighting Set...

  • Page 23: Connections And Controls

    [Down] | Decreases the displayed value by one. 3 Infrared receiver for the signals of the optionally available remote control. 4 [Footswitch Input] | 6.35-mm jack socket for connecting the foot switch unit Compact LED Bar CLB8 LED Lighting Set...
  • Page 24 6 [DMX Out] | DMX output, designed as XLR panel socket, 3-pin 7 [Power Out] | Rubber panel sockets for the power supply cable to the next device of the same type 8 Receiving antenna for the signals of a wireless foot switch Compact LED Bar CLB8 LED Lighting Set...
  • Page 25 10 [Dimming] | Activates the dimming function for fixed colours. Set the value for each fixed colour using [+] and [–]. 11 [R], [G], [B], [A], [W] | Buttons for selecting the colour shade in dimmer mode. Compact LED Bar CLB8 LED Lighting Set...
  • Page 26 ö & Red/Green Indicator Light 1 [Auto Run/Program] | activates the ‘Automatic’ mode (playback of preprogrammed automatic shows). 2 [Sound Active] | activates the ‘Sound-control’ mode (playback of sound-controlled automatic shows). Compact LED Bar CLB8 LED Lighting Set...
  • Page 27 5 [Red/Green Indicator Light] | status LEDs. The red LED lights up when the device is turned on. The green LED flashes when the device is receiving radio signals. 6 [Antenna] | antenna for transmission of the radio signals Compact LED Bar CLB8 LED Lighting Set...

  • Page 28: Operating

    If you don't press any button for about 10 seconds the display turns off. It will be reactivated to display the previously shown menu by pressing any button. The set values are retained even when the device is disconnected from the mains power supply. Compact LED Bar CLB8 LED Lighting Set...
  • Page 29 [Down] to select a value between ‘SP01’ (slow) and ‘SPFL’ (fast). To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and [Down] to select a value between ‘FS01’ (slow) and ‘FS99’ (fast). Compact LED Bar CLB8 LED Lighting Set...
  • Page 30 ‘SP01’ (slow) and ‘SPFL’ (fast). To adjust the strobe frequency, press [Setup] again. The display shows ‘FS00’ . Use [Up] and [Down] to select a value between ‘FS00’ (slow) and ‘FS99’ (fast). Compact LED Bar CLB8 LED Lighting Set...
  • Page 31 This setting is only relevant if the device is serving as Slave in a Master / Slave configuration and is not controlled via DMX. Press [Mode] repeatedly until the display shows ‘SLAv’ . Compact LED Bar CLB8 LED Lighting Set...
  • Page 32 During network operation switch the main switch on the rear side of the wireless foot switch to [Off]. Otherwise the wireless foot switch operates in battery mode although being connected to the power supply and discharges correspondingly. Compact LED Bar CLB8 LED Lighting Set...
  • Page 33 (display shows ‘r.xxx’ , ‘G.xxx’ , ‘b.xxx’ or ‘U.xxx’ ). Press [Setup] to change the colour. Use [Up] and [Down] to adjust the intensity of the colour: Display Meaning ‘r.000’ … ‘r.255’ ‘G.000’ … ‘G.255’ Green ‘b.000’ … ‘b.255’ Blue ‘U.000’ … ‘U.255’ White Compact LED Bar CLB8 LED Lighting Set...
  • Page 34 Release the buttons and confirm with [Setup]. Then switch the LED bar off and on again. The device then starts automatic operation. After resetting to default settings and changing parameters, the device must be turned off and on again. Compact LED Bar CLB8 LED Lighting Set...

  • Page 35: Menu Overview

    Operating 7.3 Menu overview Compact LED Bar CLB8 LED Lighting Set...
  • Page 36 Operating Compact LED Bar CLB8 LED Lighting Set...

  • Page 37: Functions In 2-Channel Dmx Mode

    70 … 76 Constant unicoloured pattern in green and white for all LEDs 77 … 83 Constant unicoloured pattern in blue and white for all LEDs 84 … 90 Preprogrammed automatic show no. 01 Compact LED Bar CLB8 LED Lighting Set...

  • Page 38: Functions In 4-Channel Dmx Mode

    Intensity green (0 % to 100 %), for all LEDs together 0 … 255 Intensity blue (0 % to 100 %), for all LEDs together 0 … 255 Intensity white (0 % to 100 %), for all LEDs Compact LED Bar CLB8 LED Lighting Set...

  • Page 39: Functions In 18-Channel Dmx Mode

    Intensity white (0 % to 100 %) all LEDs spot 3 0 … 255 Intensity red (0 % to 100 %) all LEDs spot 4 0 … 255 Intensity green (0 % to 100 %) all LEDs spot 4 Compact LED Bar CLB8 LED Lighting Set...
  • Page 40 0 … 255 Intensity white (0 % to 100 %) all LEDs spot 4 0 … 9 No function 10 … 255 Strobe effect, increasing speed 0 … 255 Dimmer (0 % to 100 %) Compact LED Bar CLB8 LED Lighting Set...

  • Page 41: Technical Specifications

    USE ONLY WITH A 250 V FUSE 856 mm Light source 24 × RGBW LED, type Quad 4-in-1, 8 W, on four moving Flat PARs Optical properties Beam angle approx. 40° Control Infrared remote control (optional) Compact LED Bar CLB8 LED Lighting Set...
  • Page 42 5 mm × 20 mm, 3 A, 250 V, slow blow Transmitting frequency of radio antenna 2.4 GHz Max. transmission power 100 mW Remote control battery Lithium-ion button cell CR2025, 3 V Foot switch battery 9-V block battery International Protection Rating IP20 Compact LED Bar CLB8 LED Lighting Set...
  • Page 43 856 mm × 307 mm × 98 mm Weight 8.9 kg Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20%…80% (non-condensing) Further information Spotlight included Effect devices included LED bars included Controller included Stand included Case/bag included Compact LED Bar CLB8 LED Lighting Set...

  • Page 44: Plug And Connection Assignments

    The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please refer to the drawing and table below for the pin assignment of a suitable XLR plug. Configuration Ground, shielding Signal inverted (DMX–, ‘cold signal’) Signal (DMX+, ‘hot signal’) Compact LED Bar CLB8 LED Lighting Set...

  • Page 45: Troubleshooting

    Use special DMX cables for the wiring instead of normal microphone cables. In the following we list a few common problems that may occur during operation. We give you some suggestions for easy troubleshooting: Compact LED Bar CLB8 LED Lighting Set...
  • Page 46 DMX interface circuit. If the procedures recommended above do not succeed, please contact our Service Center. You can find the contact information at www.thomann.de. Compact LED Bar CLB8 LED Lighting Set...

  • Page 47: Cleaning

    Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). Always dry the parts carefully. Compact LED Bar CLB8 LED Lighting Set...
  • Page 48 Dispose the built-in lithium batteries together with the device. Check for an appropriate collection facility. Dispose of the batteries and rechargeable batteries at relevant collection points or through your local waste facility. Compact LED Bar CLB8 LED Lighting Set...
  • Page 49 Also note that waste avoidance is a valuable contribution to environmental protection. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. If your old device contains personal data, delete those data before disposing of it. Compact LED Bar CLB8 LED Lighting Set...
  • Page 50 Notes Compact LED Bar CLB8 LED Lighting Set...
  • Page 52 Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de...

Table of Contents