Advertisement

HOOD INSTALLATION, MAINTENANCE AND USAGE
DQ 4446 XUK

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DQ 4446 XUK and is the answer not in the manual?

Questions and answers

Summary of Contents for Gorenje DQ 4446 XUK

  • Page 1 HOOD INSTALLATION, MAINTENANCE AND USAGE DQ 4446 XUK...
  • Page 2: En Instruction On Mounting And Use

    EN Instruction on mounting and use...
  • Page 6 EN - Instruction on mounting and use Closely follow the instructions set out in this manual. All responsibility, for any eventual inconveniences, damages or fires caused by not complying with the instructions in this manual, is declined. The extractor hood has been designed exclusively for domestic use.
  • Page 7: Installation

    The hood is designed to be used either for exhausting or filter version. The models with no suction motor only operate in ducting mode, and must be connected to an external suction device (not supplied). The connecting instructions are supplied with the peripheral suction unit. Ducting version In this case the fumes are conveyed outside of the building by means of a special pipe connected with the connection ring located on top of the hood.
  • Page 8: Operation

    Operation Use the high suction speed in cases of concentrated kitchen vapours. It is recommended that the cooker hood suction is switched on for 5 minutes prior to cooking and to leave in operation during cooking and for another 15 minutes approximately after terminating cooking.
  • Page 9 Grease filter Traps cooking grease particles. This must be cleaned once a month (or when the filter saturation indication system – if envisaged on the model in possession – indicates this necessity) using non aggressive detergents, either by hand or in the dishwasher, which must be set to a low temperature and a short cycle.

Table of Contents