Home Decorators Collection AK407-MWH Use And Care Manual page 14

Operation (continued)
INSTALLING THE REMOTE CONTROL HOLDER
To install the remote control bracket (TT), remove the two
screws holding the switch cover plate (UU). Do not remove the
cover plate (UU). Orient the bracket (TT) by lining up the two
mounting holes with those on the cover plate (UU). Insert and
tighten the screws (VV).
Then install the remote control holder (WW), orient the remote
control holder (WW) by lining up the two mounting holes with
those on the remote control bracket (TT). Insert and tighten the
screws (XX).
FOR ROCKER-STYLE STYLE COVER PLATE
To install the remote control holder (WW), orient the remote
control holder (WW) by lining up the two mounting holes with
those on the cover plate (YY). Insert and tighten the screws (VV).
WARM/COOL WEATHER OPERATING
INSTRUCTIONS
Speed settings for warm or cool weather depend on factors such as
the room size, ceiling height, numbers of fans.
NOTE: The fan reverse buttons must be pressed while the
fan is running.
Warm weather - (Counterclockwise Direction) A downward air ow
creates a cooling effect. This allows you to set your air conditioner
on a warmer setting without affecting your comfort.
Cool weather - (Clockwise Direction) An upward air ow moves warm
air off the ceiling. This allows you to set your heating unit on a cooler
setting without affecting your comfort.
XX WW
VV
14
TT
VV
YY
WW
UU