Operation (continued)
OPERATING YOUR FAN AND REMOTE CONTROL
NOTE: The fan will store the last used speed setting for the next time it is turned on.
NOTE: On each start up of your ceiling fan, the fan blades will oscillate back and forth. This is a NORMAL OPERATION for DC motor ceiling
fans as they go through a calibration cycle. The fan is NOT DEFECTIVE.
Power ALL button: Press and release the power button to turn
the fan and light on or off.
Fan ON/OFF button: Press and release this button to turn the
fan on or off.
Fan 6 SPEED button: Press and release the "+" button to
increases the fan speed. Press and release the "-" button to
decreases the fan speed.
Light ON/OFF button: Press and release this button to turn the
light on or off.
Light BRIGHTNESS button: Press and hold the "+" button to
increase the desired light level. Press and hold the "-" button
to decrease the desired light level.
Pressing the
button will activate the Comfort Breeze
If you are using Comfort Breeze
or the fan speed buttons will cancel Comfort Breeze
and resume normal fan operation.
2
Pressing the timer button will automatically turn fan off
HR
after 2, 4, or 8 hours. To cancel the timer settings, press
4
HR
and hold the button three seconds and the signal light will
ash.
8
HR
Forward, press and hold the button three seconds and the
signal light will ash.
SUMMER
Reverse, press and hold the button three seconds and the
signal light will ash.
WINTER
mode.
TM
mode, pressing the
button
TM
mode
TM
Signal light
Fan on/off
Fan on/
Increases /
decreases
fan speed
Comfort Breeze
TM
Timer
Forward
13
Please contact 1-800-986-3460 for further assistance.
ALL
ON / OFF
ON / OFF
BRIGHTNESS
6 SPEED
BREEZE
2
4
8
HR
HR
HR
TIMER
SUMMER
WINTER
FAN DIRECTION
HOLD 3 SEC.
HOMEDEPOT.COM/HOMEDECORATORS
Power on/off
Light on/off
Light on/
light dimming
Reverse
Need help?
Do you have a question about the AK407-MWH and is the answer not in the manual?
Questions and answers