Download Print this page
Shark Cordless Clean & Empty BU3000 Series Instructions

Shark Cordless Clean & Empty BU3000 Series Instructions

Hide thumbs Also See for Cordless Clean & Empty BU3000 Series:

Advertisement

Quick Links

IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO REDUCE THE RISK OF INJURY, USER MUST READ INSTRUCTION MANUAL • HOUSEHOLD USE ONLY
WARNING
1.
This vacuum consists of a motorized nozzle, wand, and
handheld vacuum. These components contain electrical
connections, electrical wiring, and moving parts that potentially
present risk to the user.
2.
Before each use, carefully inspect all parts for any damage. If a
part is damaged, discontinue use.
3.
Use only identical replacement parts.
4.
This vacuum contains no serviceable parts.
5.
Use only as described in this manual. DO NOT use the vacuum
for any purpose other than those described in this manual.
6.
With the exception of the filters and dust cup, DO NOT expose
any parts of the vacuum to water or other liquids.
7.
Keep the appliance and its cord out of reach of children. DO
NOT allow the appliance to be used by children. DO NOT allow
to be used as a toy. Close supervision is necessary when used
near children.
GENERAL USE
8.
This appliance can be used by persons with reduced physical,
sensory, or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved. Cleaning and user maintenance shall not be
made by children.
9.
Always turn off the vacuum before connecting or disconnecting
any current carrying hoses, motorized nozzles, chargers,
batteries, or other electrical or mechanical parts.
10. DO NOT handle plug or vacuum with wet hands.
11. DO NOT use without dust cup, HEPA and pre-motor filters, and
brushroll in place.
12. Only use Shark® branded filters and accessories. Failure to do so
will void the warranty.
13. DO NOT put any objects into nozzle or accessory openings. DO
NOT use with any opening blocked; keep free of dust, lint, hair,
and anything that may reduce airflow.
14. DO NOT use if nozzle or accessory airflow is restricted. If the air
paths or the motorized floor nozzle become blocked, turn the vacuum
off. Remove all obstructions before you turn on the unit again.
15. Keep nozzle and all vacuum openings away from hair, face,
fingers, uncovered feet, or loose clothing.
16. DO NOT use if vacuum is not working as it should, or has been
dropped, damaged, left outdoors, or dropped into water.
17. Use extra care when cleaning on stairs.
18. DO NOT leave the vacuum unattended while powered on.
19. When powered on, keep the vacuum moving over the carpet
surface at all times to avoid damaging the carpet fibers.
20. DO NOT place vacuum on unstable surfaces such as chairs or tables.
21. DO NOT use to pick up:
a) Liquids
b) Large objects
c) Hard or sharp objects (glass, nails, screws, or coins)
d) Large quantities of dust (including drywall, fireplace ash,
or embers). DO NOT use as an attachment to power tools
for dust collection.
e) Smoking or burning objects (hot coals, cigarette butts,
or matches)
f) Flammable or combustible materials (lighter fluid, gasoline,
or kerosene)
g) Toxic materials (chlorine bleach, ammonia, or drain cleaner)
22. DO NOT use in the following areas:
a) Poorly lit areas
b) Wet or damp surfaces
© 2023 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC.
BU3000Series_QSG_MP_Mv8
Shark
Cordless Clean & Empty BU3000 Series
®
When using an electrical appliance, to reduce the risk of fire, electric shock, injury, or
property damage, basic precautions should always be followed, including the following:
READ AND SAVE THESE INSTRUCTIONS
VISIT qr.sharkclean.com/bu3000seriesmanual OR
SCAN HERE
FOR FULL INSTRUCTIONS & REPLACEMENT PARTS
c) Outdoor areas
d) Spaces that are enclosed and may contain explosive or toxic
fumes or vapors (lighter fluid, gasoline, kerosene, paint, paint
thinners, mothproofing substances, or flammable dust)
23. Turn off the vacuum before plugging in or unplugging the charger.
24. Turn off the vacuum before any adjustment, cleaning,
maintenance or troubleshooting.
25. During cleaning or routine maintenance, DO NOT cut anything
other than hair, fibers, or string wrapped around the brushrolls.
26. Allow all filters to air-dry completely before replacing them in the
vacuum to prevent liquid from being drawn into electric parts.
27. DO NOT modify or attempt to repair the vacuum or the battery
yourself, except as indicated in this manual. DO NOT use the
battery or vacuum if it has been modified or damaged. Damaged
or modified batteries may exhibit unpredictable behavior
resulting in fire, explosion, or risk of injury.
28. Always turn off this appliance before connecting or
disconnecting motorized nozzle or hand tool.
BATTERY PACK
29. The battery is the power source for the vacuum. Carefully read
and follow all charging instructions.
30. To prevent unintentional starting, ensure it is powered off before
picking up or carrying the vacuum. DO NOT carry the appliance
with your finger on the power switch.
31. For BU3120 and BU3500 series please use battery pack
XBTR625KSLN. For charging, please use charger dock
XDCKBU3500S or chargers DK25A-263080H-U or
YLS0251A-T263080.
32. Keep the battery away from all metal objects such as paper clips,
coins, keys, nails, or screws. Shorting the battery terminals
increases the risk of fire or burns.
33. Under abusive conditions, liquid may be ejected from the
battery. Avoid contact with this liquid, as it may cause irritation
or burns. If contact occurs, flush with water. If liquid contacts
eyes, seek medical help.
34. Battery should not be stored at temperatures below 3°C (37.4°F)
or above 104°F (40°C) to maintain long-term battery life.
35. DO NOT charge battery at temperatures below 5°C (40°F) or
above 104°C (104°F). Charging improperly or at temperatures
outside of the specified range may damage the battery and
increase the risk of fire.
36. Store the appliance indoors. DO NOT use or store below 3°C (37.4°F).
Ensure the appliance is at room temperature before operating.
37. DO NOT expose the battery to fire or temperatures above 265°F
(130°C) as it may cause explosion.
38. Use appliances only with specifically designated battery packs. Use
of any other battery packs may create a risk of injury and fire.
39. Disconnect the battery pack from the appliance before making
any adjustments, changing accessories, or storing appliance.
Such preventive safety measures reduce the risk of starting the
appliance accidentally.
40. CAUTION: Because of generational update to BU3120 please
read the following notes: Remove the battery pack, and
check the rating voltage and battery pack model. If the rating
voltage is 18V or the battery pack model is XBATR525SL,
please use battery pack XBATR525SL and use charging
dock: XDCKBU3000S or charger: DK18-22080H-UU or
YLS0251A-T220080 for charging.
41. If the charging cord plug does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. DO
NOT force into outlet or try to modify to fit.
42. To reduce the risk of shock and unintended operation, turn off
power and remove the Li-Ion battery before servicing.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Cordless Clean & Empty BU3000 Series and is the answer not in the manual?

Questions and answers

terry phillips
February 4, 2025

the power lites do not come on after I fully charged the system - BU3000 cordless clean and empty

1 comments:
Mr. Anderson
February 10, 2025

When the battery is fully charged, the LED light turns white and then shuts off. This is normal operation and indicates that the battery is fully charged.

This answer is automatically generated

Summary of Contents for Shark Cordless Clean & Empty BU3000 Series

  • Page 1 Li-Ion battery before servicing. b) Wet or damp surfaces READ AND SAVE THESE INSTRUCTIONS VISIT qr.sharkclean.com/bu3000seriesmanual OR SCAN HERE FOR FULL INSTRUCTIONS & REPLACEMENT PARTS © 2023 SharkNinja Operating LLC. SHARK is a registered trademark of SharkNinja Operating LLC. BU3000Series_QSG_MP_Mv8...
  • Page 2 Please be sure to read and save the warnings on other side prior to using your unit. QUICK START GUIDE How to set up the Shark® Cordless Clean & Empty Stick Vacuum + Auto-Empty System BU3000 Series ASSEMBLY SETTINGS 1. Slide the Wand onto the neck of the Floor Nozzle until it clicks into place.
Save PDF