Fitting; Assembling; Activating - Rexton BiCore Custom Li ITC Manual For Hearing Care Professionals

FITTING

You must prepare the hearing instruments before you
can start fitting.

ASSEMBLING

X

ACTIVATING

Before first use or first fitting, you must activate the
hearing instruments. Place the hearing instruments
in the charger (if they are not already inserted) and
press the charger's button until the LEDs for the
hearing instruments light up green.
Note:
■
4
RX_BiCore_Custom_Li_ITC_Dispenser_EN.indd 4 RX_BiCore_Custom_Li_ITC_Dispenser_EN.indd 4
A power cell is installed in every hearing instrument on
delivery. There is no need to insert a battery.
Hearing instruments that are activated and not
used may discharge faster than hearing instruments
that have not been activated. Only activate the
hearing instruments before first use or first fitting.
01-12-2021 10:30:02 01-12-2021 10:30:02