Do you have a question about the REACH R-LI 80 and is the answer not in the manual?
Questions and answers
Donna McCulloch
April 17, 2025
I heard a melodic chime sound in my right aid when I put it on. What does that mean?
1 comments:
Mr. Anderson
May 9, 2025
A melodic chime sound in the Rexton REACH R-LI 80 hearing aid indicates a low power warning. It signals that the power cell is running low and will be repeated every 15 to 30 minutes depending on settings.
This answer is automatically generated
Peter Pearson
April 8, 2025
how can i answer my cell phone with rexton reach
1 comments:
Mr. Anderson
April 9, 2025
To answer your cell phone with the Rexton Reach R-LI 80 hearing aids, you can use the hands-free calling feature if you have a compatible iPhone or iPad. For Android phones that support Audio Streaming for Hearing Aids (ASHA), you can also receive calls directly through your hearing aids. Ensure your hearing aids are paired with your phone via Bluetooth.
This answer is automatically generated
Dan Coleman
March 14, 2025
Can I leave my hearing aids plugged in
1 comments:
Mr. Anderson
March 14, 2025
Yes, you can leave Rexton REACH R-LI 80 hearing aids in the powered charger, as long as the charger is connected to a power supply or fully charged. This helps prevent deep discharge of the power cell, which can permanently damage it.
This answer is automatically generated
Dorothy Palisi
March 8, 2025
What are buttons on back of Rexton LI for?
1 comments:
Mr. Anderson
March 8, 2025
The buttons on the back of the Rexton REACH R-LI 80 hearing aids are used for manual volume adjustment. Pressing the upper part of the rocker switch increases the volume, while pressing the lower part decreases it.
This answer is automatically generated
Marita Branscum
January 27, 2025
Need to know right or left placement by color?
1 comments:
Mr. Anderson
May 14, 2025
The correct color placement for the Rexton R-Li 80 is: - Red marker = right ear - Blue marker = left ear
This answer is automatically generated
Thomas Aultz
May 26, 2025
what is the separate cover 0n the top of the hearing aid?
Content Safety information Intended use Explanation of symbols General warnings For certain hearing aid types For hearing aids with built-in power cells (lithium-ion rechargeable batteries) When using remote control apps Important information Operating, transport and storage conditions Disposal information Conformance information For US and Canadian markets only For prospective hearing aid users For hearing aid users...
Page 3
This User Guide 1 (Safety Manual for US and Canadian markets) is valid for: Hearing aids Reach R-Li 80 Reach R-Li T 80...
Safety information This safety manual provides safety information and other important information about your hearing aids. It covers several hearing aid types and optional features. Refer to User Guide 2 (Instructions for Use) for your hearing aids to check the hearing aid type and the activated features.
Page 5
WARNING to Hearing Aid Dispensers: You should advise a prospective hearing aid user to consult promptly with a doctor, preferably an ear specialist such as an ENT, before dispensing a hearing aid if you determine through inquiry, actual observation, or review of any other available information concerning the prospective user, that the prospective user has any of the following conditions: Visible deformity of the ear, either congenital...
Page 6
WARNING to Hearing Aid Dispenser, Outputs over 132 dB SPL: You should exercise special care in selecting and fitting a hearing aid with a maximum output that exceeds 132 dB SPL because it may impair the remaining hearing of the hearing aid user. CAUTION This is not hearing protection.
Page 7
CAUTION You might need medical help if a piece gets stuck in your ear. If any part of your hearing aid, like the eartip, gets stuck in your ear, and you can’t easily remove it with your fingers, get medical help as soon as you can.
Page 8
NOTICE Tell FDA about injuries, malfunction, or other adverse events. To report a problem involving your hearing aid, you should submit information to FDA as soon as possible after the problem. FDA calls them “adverse events,” and they might include: skin irritation in your ear, injury from the device (like cuts or scratches, or burns from an overheated batter), pieces of the device getting stuck in your...
Page 9
NOTICE Hearing loss in people younger than 18. People younger than 18 should see a doctor first, preferably an ear-nose- throat doctor (an ENT), because they may have different needs than adults. The doctor will identify and treat medical conditions as appropriate. The doctor may refer the person to an audiologist for a separate test, a hearing aid evaluation.
The doctor may refer the person to an audiologist for a hearing aid evaluation, which is different from the medical evaluation and is intended to identify the appropriate hearing aid. The audiologist will conduct a hearing aid evaluation to assess the person’s ability to hear with and without a hearing aid.
Explanation of symbols Symbols used in this document Points out a situation that could lead to serious, moderate, or minor injuries. Indicates possible property damage. Symbols on the device or packaging CE compliance label, confirms compliance with certain European Directives, refer to section 0123 "Conformance information".
Page 12
Symbols on the device or packaging According to IEC 60601-1, the applied parts of this device are classified as type B. Keep dry during transportation. Temperature during transportation. Read more in section "Operating, transport and storage conditions". Relative humidity during transportation. Read more in section "Operating, transport and storage conditions".
General warnings WARNING Risk of impairing the residual hearing of the user. Use only hearing aids that have been fitted especially for your needs. WARNING Risk of injury! Do not use obviously damaged devices and return them to point of sale. WARNING Note that any unauthorized changes to the product may cause damage to the product or cause injury.
Page 14
WARNING This product can expose you to nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. WARNING Choking hazard! Your hearing aids contain small parts which can be swallowed. Keep hearing aids, batteries and accessories out of reach of children and mentally disabled persons.
Page 15
NOTICE Different types of strong radiation, e.g. during X-ray or MRI head examinations, may damage hearing aids. Do not wear the hearing aids during these or similar procedures like electrosurgery (diathermy, electrocautery, HF-surgery). Weaker radiation, e.g. from radio equipment or airport security, does not damage the hearing aids.
Page 16
WARNING If a battery is accidentially swallowed, seek medical attention immediately, or call the National Battery Ingestion Hotline collect at 1-800-498-8666. For Canada: Contact the local Poisons Information Hotline for your province, which can be found at https://infopoison.ca. Contraindications WARNING In case of a known contact allergy, consult the hearing aid manufacturer regarding the presence of the allergen before using the hearing aid.
Page 17
For hearing aids with wireless functionality In some countries restrictions for the usage of wireless equipment exist. Refer to local authorities for further information. WARNING Risk of affecting electronic equipment! In areas where the use of electronics or wireless devices are restricted, verify if your device has to be turned off.
For certain hearing aid types RIC models The receiver is placed within the ear canal and connected to the hearing aid via a receiver cable. CAUTION Risk of injury! Always wear the receiver cable with an ear piece. Make sure that the ear piece is completely attached.
NOTICE Do not pull the receiver connection as this could damage your hearing aids. For hearing aids with built-in power cells (lithium-ion rechargeable batteries) Read the safety information on power cells in the hearing aid’s user guide. When using remote control apps When using an app for controlling hearing aids: WARNING Risk of hearing damage!
Important information Operating, transport and storage conditions For hearing aids with built-in power cells (lithium-ion rechargeable batteries) Read the operating, transport and storage conditions in the hearing aid's user guide. Expected service lifetime The hearing aids are designed for an expected service life of 5 years.
Page 21
Only for products with wireless functionality: ■ 2014/53/EU RED concerning radio equipment The full text of the declaration of conformity can be obtained from www.wsaud.com. The ACMA compliance mark indicates conformity with the electromagnetic interference standards set by the Australian Communications and Media Authority (ACMA). Devices with the FCC marking comply with the standards of the FCC regarding electromagnetic interference (only for products with wireless functionality).
Page 22
This device complies with Part 15 of the FCC Rules and with ISED’s licence-exempt RSSs. Operation is subject to the following conditions: this device may not cause harmful interference, and ■ this device must accept any interference received, ■ including interference that may cause undesired operation.
Page 23
For body worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with the legal manufacturer’s accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Data is stored inside the hearing aid.
Page 24
Nearfield magnetic induction functionality The following table shows the main information on NFMI connectivity, some parameters are different from product to product, so the worst case is indicated: Wireless technology Nearfield magnetic induction (NFMI) Magnetic field strength 0.14 A/m Output power (EIRP) 53 μW Range <...
Page 25
Bluetooth low energy* ® The following table shows the main information on BLE, some parameters are different from product to product, so the worst case is indicated: Wireless technology Radio frequency - Bluetooth low energy (BLE) Output power (EIRP) 3.9 mW Range <...
Page 26
EMI/EMC compliance Wireless hearing aids comply with the following EMC/EMI standards: Standard Test Type Note 47 CFR RF emissions U.S. FCC requirements Part 15, for intentional radiators. Subpart C EN 300 330 RF emissions EMC and radio spectrum including matters for short range spurious devices in the frequency emission...
Page 27
Standard Test Type Note IEC 60118-13 RF immunity International product standard for hearing aids to ensure adequate immunity to radio interference from mobile telephones. ANSI C63.19 RF immunity American National Standard method of measurement of compatibility between wireless communication devices and hearing aids. ANSI/AAMI RF emissions Implantable medical...
Emissions CISPR 11, Group 1, Class B Immunity ESD, Conducted up to +/-8 kV, Air discharge up to +/-15 kV Power frequency magnetic fields: 30 A/m, 50/60 Hz Immunity to RF 80 MHz-2.7 GHz 10 V/m, fields 2.7 GHz-6 GHz 3 V/m Proximity Up to 28 V/m –...
Page 29
Following the medical evaluation, the physician will give you a written statement that states that your hearing loss has been medically evaluated and that you may be considered a candidate for hearing aids. The physician will refer you to a Hearing Care Professional for a hearing aid evaluation. The Hearing Care Professional will conduct a hearing aid evaluation to assess your ability to hear with and without hearing aids.
For hearing aid users Hearing aids will not restore normal hearing and will not prevent or improve a hearing impairment resulting from organic conditions. In most cases infrequent use of hearing aids prohibits the wearer from attaining the full benefit from it. The use of hearing aids is only part of hearing rehabilitation and may need to be supplemented by auditory training and instruction in lip reading.
Page 31
For RIC hearing aids, the year of manufacture is derived from the second digit: AC12345 Code (first digit) Month Code (first digit) Month A, N G, U B, P H, V C, Q J, W D, R K, X E, S L, Y F, T M, Z...
For children with hearing loss In addition to seeing a physician for a medical evaluation, a child with a hearing loss should be directed to an audiologist for evaluation and rehabilitation since hearing loss may cause problems in language development and the educational and social growth of a child.
Warranty and service Your hearing aid, with the exception of the battery, is covered by a comprehensive warranty. All covered hearing aid parts received for warranty service at an authorized service center will be repaired or replaced with new or reconditioned components, without charge, to meet the performance specifications for that model.
Page 34
Support For more detailed information or in case of unexpected operation or events please contact WSAUD A/S Nymøllevej 6 3540 Lynge Denmark www.wsa.com Phone: +45 44 35 56 00...
Need help?
Do you have a question about the REACH R-LI 80 and is the answer not in the manual?
Questions and answers
I heard a melodic chime sound in my right aid when I put it on. What does that mean?
A melodic chime sound in the Rexton REACH R-LI 80 hearing aid indicates a low power warning. It signals that the power cell is running low and will be repeated every 15 to 30 minutes depending on settings.
This answer is automatically generated
how can i answer my cell phone with rexton reach
To answer your cell phone with the Rexton Reach R-LI 80 hearing aids, you can use the hands-free calling feature if you have a compatible iPhone or iPad. For Android phones that support Audio Streaming for Hearing Aids (ASHA), you can also receive calls directly through your hearing aids. Ensure your hearing aids are paired with your phone via Bluetooth.
This answer is automatically generated
Can I leave my hearing aids plugged in
Yes, you can leave Rexton REACH R-LI 80 hearing aids in the powered charger, as long as the charger is connected to a power supply or fully charged. This helps prevent deep discharge of the power cell, which can permanently damage it.
This answer is automatically generated
What are buttons on back of Rexton LI for?
The buttons on the back of the Rexton REACH R-LI 80 hearing aids are used for manual volume adjustment. Pressing the upper part of the rocker switch increases the volume, while pressing the lower part decreases it.
This answer is automatically generated
Need to know right or left placement by color?
The correct color placement for the Rexton R-Li 80 is:
- Red marker = right ear
- Blue marker = left ear
This answer is automatically generated
what is the separate cover 0n the top of the hearing aid?