Sleep Mode; Timer Operation - Frigidaire FRS093LS1 Use And Care Manual

SLEEP mode

Press the sleep button to activate the
sleep mode. To deactivate, press the
button again.
In cooling mode:
In heating mode (only for models with
heating function):

TIMER Operation

TIMER button can set the auto-on time of the unit.
To set the starting time
1. Press the TIMER ON button, then the remote controller shows TIMER ON,
the last set time for the starting operation and the signal "h" will be shown
on the DIGITAL DISPLAY area. You are now ready to reset the time to START
the operation.
2. Press the TIMER ON button again to set desired time for starting operation.
3. After setting the TIMER ON, there will be a one-half second delay before
the remote controller transmits the signal to the air conditioner. Then, after
approximately another 2 seconds, the signal "h" disappears and the set
temperature will re-appear on the digital display.
SLEEP FUNCTION (Cooling mode)
SLEEP FUNCTION (Heating mode)
How the air conditioner works
2 °F
2 °F
1 hour 1 hour 7 hours
2 °F
2 °F
1 hour 1 hour
7 hours
38