Manual operation (without remote control)
Manual operation can be used
temporarily in case you can not find
the remote controller or its batteries
are exhausted.
1. Open and lift the front panel up to
an angle until it remains fixed with
a clicking sound.
2. One press of the manual control
button will lead to the forced AUTO
operation.
3. Close the panel firmly to its
original position.
Attention
Once you press the manual button, the
operation mode is shifted in an order
as: AUTO, COOL, OFF.
If the button is pressed again within five
seconds, the unit will operate in forced
COOL mode, otherwise the mode will
skip to OFF directly. The manual
operation is mainly used for testing
purpose. Do not choose it unless it is
necessary. To return to the remote
controller operation, use the remote
controller
Manual control
button
Auto/Cool
Manual operation
42