Carrying power tools with your fi nger on the switch GENERAL POWER TOOL SAFETY or energising power tools that have the switch on WARNINGS invites accidents. d) Remove any adjusting key or wrench before WARNING turning the power tool on. Read all safety warnings and all instructions.
** Tightening the bolt without extension cord at rated voltage. SYMBOLS NOTE WARNING Due to HiKOKI’s continuing program of research and The following show symbols used for the machine. Be development, the specifi cations herein are subject to sure that you understand their meaning before use.
Table 1 NOTE Mode Indicator Lamp (3) Due to HiKOKI’s continuing program of research and Cause of Shutdown (see Fig. 2) development, the specifi cations herein are subject to change without prior notice. Fast repeated fl ashes Automatic shutdown Flashing Flashes on and off...
Page 5
A : 0 - 1400 / 0 - 1500 / min B : 0 - 1600 / 0 - 1900 / min C : 0 - 1800 / 0 - 2300 / min D : 0 - 2100 / 0 - 2700 / min...
Need help?
Do you have a question about the WR 14VE and is the answer not in the manual?
Questions and answers