中文 USB 设备的充电方法 警告 ○ 使用之前请检查 USB 连接线缆是否有破损或损坏。 使用有破损或损坏的 USB 线缆可能会导致冒烟或着火。 ○ 不使用产品时,请用橡胶盖封好 USB 端口。 USB 端口中落入灰尘等可能会导致冒烟或着火。 注 : ○ USB 充电过程中,可能会有偶尔暂停。 ○ USB 设备未充电时,请将充电器上拔下 USB 设备。 否则不仅会减少 USB 设备的电池寿命,还会导致意外事故。 ○ 根据设备类型,可能无法对部分 USB 设备进行充电。 (1) 选择充电方式 根据所选的充电方式,将电池插入充电器或连接电源线插入插座。 ○ 将 USB 设备插入插座进行充电 ( 图 17-a)。 ○...
English CONTENTS GENERAL POWER TOOL SAFETY WARNINGS ........26 CORDLESS IMPACT WRENCH SAFETY WARNINGS .......29 CAUTION ON LITHIUM-ION BATTERY ............31 REGARDING LITHIUM-ION BATTERY TRANSPORTATION ......32 PRECAUTIONS REGARDING THE DUST-RESISTANCE AND WATER-PROOFING FUNCTIONS ...............33 SYMBOLS ....................33 NAME OF PARTS..................34 SPECIFICATIONS ..................35 STANDARD ACCESSORIES ...............36 APPLICATIONS ....................36 BATTERY REMOVAL / INSTALLATION ............37 CHARGING ....................37...
Page 27
English Electrical safety a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodifi ed plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators.
Page 28
English g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
English Service a) Have your power tool serviced by a qualifi ed repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. CAUTION Keep children and infi rm persons away. When not in use, tools should be stored out of reach of children and infi rm persons. CORDLESS IMPACT WRENCH SAFETY WARNINGS Hold power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring.
Page 30
English 10. Never let the impact wrench turn without a load when using the universal joint. If the socket turns without being connected to a load, the universal joint causes the socket to turn wildly. You could get hurt or the movement of the socket could shake the impact wrench so much as to make you drop it.
English CAUTION ON LITHIUM-ION BATTERY To extend the lifetime, the lithium-ion battery equips with the protection function to stop the output. In the cases of 1 to 3 described below, when using this product, even if you are pulling the switch, the motor may stop. This is not the trouble but the result of protection function.
English CAUTION If liquid leaking from the battery gets into your eyes, do not rub your eyes and wash them well with fresh clean water such as tap water and contact a doctor immediately. If left untreated, the liquid may cause eye-problems. If liquid leaks onto your skin or clothes, wash well with clean water such as tap water immediately.
English PRECAUTIONS REGARDING THE DUST-RESISTANCE AND WATER-PROOFING FUNCTIONS This product conforms to IP56 protection class ratings (dust-resistance and water-proofi ng) for electrical equipment as stipulated by the international IEC regulations. (Only the main unit conforms to the IP56 protection class ratings when equipped with a battery.) [Descriptions of IP Codes] IP56 Protection rating for water penetration...
English NAME OF PARTS POWER TOOL Hammer case Anvil Friction ring Motor Auto stop mode High / Low mode LED Light Push button selector switch selector switch Trigger switch Switch panel Handle Auto stop mode High / Low mode Hook indicator lamp indicator lamp Battery...
English STANDARD ACCESSORIES In addition to the main unit (1 unit), the package contains the accessories listed in the below. Table 1 WR36DE 2XCP Charger (UC18YSL3) — Battery (BSL36A18) — Battery cover — Case (Stackable) The charger and battery supplied are diff erent depending on the set specifi cation. APPLICATIONS Tightening and loosening of all types of bolts and nuts, used for securing structural items.
English BATTERY REMOVAL / INSTALLATION Latch Battery removal Handle Hold the handle tightly and push the battery latches to Battery remove the battery (see Fig. 6). CAUTION Never short-circuit the battery. Battery installation Insert Insert the battery while observing its polarities Pull out (see Fig.
Page 38
English Charging When inserting a battery in the charger, the charge indicator lamp will blink in blue. When the battery becomes fully recharged, the charge indicator lamp will light up in green. (See Table 2) Charge indicator lamp indication The indications of the charge indicator lamp will be as shown in Table 2, according to the condition of the charger or the rechargeable battery.
Page 39
English Regarding the temperatures and charging time of the rechargeable battery The temperatures and charging time will become as shown in Table 3. Table 3 Charger UC18YSL3 Type of battery Li-ion Temperatures at which the 0°C–50°C battery can be recharged Charging 14.4 voltage...
English How to make the batteries perform longer. Recharge the batteries before they become completely exhausted. When you feel that the power of the tool becomes weaker, stop using the tool and recharge its battery. If you continue to use the tool and exhaust the electric current, the battery may be damaged and its life will become shorter.
○ Please use the designated attachments which are listed in the operations manual and HiKOKI’s catalog. Accidents or injuries could result from not doing so. ○ Make sure to fi rmly install the socket in the anvil. If the socket is not fi rmly installed it might come out and cause injuries.
Page 42
English Using the hook The hook is used to hang up the power tool to your waist belt while working. CAUTION ○ When using the hook, hang up the power tool fi rmly not to drop accidentally. If the power tool is dropped, it may lead to an accident. ○...
Page 43
English Table 4 State of lamp Battery Remaining Power Lights ; The battery remaining power is over 75% Lights ; The battery remaining power is 50% – 75%. Lights ; The battery remaining power is 25% – 50%. Lights ; The battery remaining power is less than 25% Blinks ;...
Page 44
English CAUTION ○ Do not expose directly your eye to the light by looking into the LED light. If your eye is continuously exposed to the light, your eye will be hurt. ○ Wipe off any dirt or grime attached to the lens of the LED light with a soft cloth, being careful not to scratch the lens.
English Table 5 Tightening mode selector function setting Rotation High / Low Auto stop mode speed mode (Auto Stop Time) (/min) 1500 Mode 1 For work that requires fi ne adjustments such as when tightening small diameter bolts. 1800 Mode 2 For work that requires the power to 2100 Mode 3...
Page 46
English Cautions on use of the speed control switch This switch has a built-in, electronic circuit which steplessly varies the rotation speed. Consequently, when the trigger switch is pulled only slightly (low speed rotation) and the motor is stopped while continuously driving in screws, the components of the electronic circuit parts may overheat and be damaged.
English HOW TO RECHARGE USB DEVICE WARNING ○ Prior to use, check the connecting USB cable for any defect or damage. Using a defective or damaged USB cable can cause smoke emission or ignition. ○ When the product is not being used, cover the USB port with the rubber cover. Buildup of dust etc.
English When charging is completed ○ To verify charge status, check the USB device. ○ Unplug the power cord from the electrical outlet. (Fig. 19) ○ Place the rubber cover over the USB port. Rubber cover USB port USB cable Fig.
TROUBLESHOOTING Use the inspections in the table below if the tool does not operate normally. If this does not remedy the problem, consult your dealer or the HiKOKI Authorized Service Center. Power tool Symptom...
Page 50
The charger’s vents are blocked, Avoid blocking the vents. causing its internal components to overheat. The cooling fan is not running. Contact a HiKOKI Authorized Service Center for repairs. The USB power lamp The battery’s capacity has become Replace the battery with one that has switched off...
Page 51
English Symptom Possible cause Remedy It is unclear what the The USB power lamp does not Examine the USB device that is charging status of switch off even when charging is charging to confi rm its charging a USB device is, or complete.
English SELECTING ACCESSORIES Select accessories that are suited to a specifi c task. For details contact HiKOKI Authorized Service Center. BSL36A18 UC18YSL3 Battery (14.4 V–18 V) Charger Part Number: 336471 Part Number: 377283 Case (Stackable) Part Number: 329897 Battery cover...
Need help?
Do you have a question about the WR 36DE and is the answer not in the manual?
Questions and answers