Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Spa Electrics MULTIPLUS
Summary of Contents for Spa Electrics MULTIPLUS
- Page 1 INSTALLATION & USER GUIDE...
-
Page 2: Table Of Contents
CONTENTS WIRING INFORMATION MANUAL MODE USER INSTRUCTIONS QUICK SETUP - iRIS QUICK SETUP - ASTRAL CONNECT 10 QUICK SETUP - DONTEK AQUATEK QUICK SETUP - PENTAIR QUICK SETUP - JANDY/ZODIAC MANUAL MULTI PLUS SETUP OPERATING MODE COLOURS READ FIRST The MULTI-PLUS light has 9 inbuilt modes of operation for use on a variety of different control systems or installation types. -
Page 3: Wiring Information
When installing multiple lights, to ensure synchronization and ease of operation ALL Lights must operate from a single switch. TRANSFORMERS LV50-12 LV25-12 POOL LIGHTS POOL CONNECTING TO POOL/LIGHTING CONTROLLER SPA ELECTRICS iRIS ASTRAL CONNECT 10 DONTEK INSNRG TRANSFORMERS POOL LIGHTS... -
Page 4: Manual Mode User Instructions
MANUAL MODE USER INSTRUCTIONS When installing multiple lights, to ensure synchronization and ease of operation ALL Lights must operate from a single switch. OPERATING INSTRUCTIONS 1. To change the color of the light, simply turn your light OFF for 2 seconds and then turn it back ON. - Page 5 (For more information on this please refer to the pool controller installation manual). NOTE: Some older pool controllers may not support these models. Please contact Spa Electrics assistance. STAGE 2 - POOL LIGHT SETUP Step 1 - Ensure the light has been turned off for at least 30 seconds...
-
Page 6: Quick Setup - Dontek Aquatek
Step 2 - Select Light Setup from the left right hamburger menu. Step 3 - On the socket allocated for the pool/spa light, select Spa Electrics Multi-Plus and press ok. Step 4 - Using the colours allocated press White, Red then Green. -
Page 7: Quick Setup - Pentair
(For more information on this please refer to the pool controller installation manual). NOTE: Some older pool controllers may not support these models. Please contact Spa Electrics assistance. STAGE 2 - POOL LIGHT SETUP Step 1 - Ensure the light has been turned off for at least 30 seconds. -
Page 8: Quick Setup Jandy/Zodiac
QUICK SETUP JANDY/ZODIAC STAGE 1 - POOL CONTROLLER SETUP When connecting the Multi Plus light to an Aqualink RS/Z4 pool controller please ensure the system is fully installed and you have completed all the relevant steps in the controller setup menu to operate the lights correctly. -
Page 9: Manual Multi Plus Setup
SLX Light Pentair IntelliTouch Intellibrite Astral Halo Lite 2 and 4 SLX Light Jandy Aqualink RS Jandy Spa Electrics MULTI-PLUS Dontek (F/W Rev. ‘R’-Current) Zodiac Aqualink TRI/Z4 Jandy Spa-E MULTI PL INSNRG NOTE: Some older pool controllers may not support these models. Please contact the controller manufacturer for upgrade assistance. -
Page 10: Quick Setup - Astral Connect
*Light Model Selected: This indicates the model of light to be selected in the Pool Controller setup menu. Refer to STEP 1 on the previous page, for more information or please contact Spa Electrics. (03) 9793 2299 *RGB MULTI Mode: This mode allows the MULTI PLUS light to operate in the standard MULTI-Colour mode. - Page 11 (depending on operating mode selected) and check to ensure all lights are synchronised and the correct colour is displayed. Refer to OPERATING MODE COLOURS for available colours. Need help identifying the version of your MULTI PLUS light? please contact Spa Electrics. (03) 9793 2299 for assistance...
-
Page 12: Operating Mode Colours
MULTI-Colour mode. This mode should only be used when operating a MULTI PLUS light from a wall switch or RM-2, in conjunction with a standard Spa Electrics MULTI-Colour light. For more information please contact Spa Electrics. (03) 9793 2299... - Page 13 Aqualink® is a registered trademark of Zodiac group Australia and/or its affiliated companies in the United states or other countries. Spa Electrics Pty Ltd and it’s brands are not affiliated or endorsed by these companies and/or their brands. 2024 05 07...
Need help?
Do you have a question about the MULTIPLUS and is the answer not in the manual?
Questions and answers