Spa Electrics R6 Instructions

TOOLS REQUIRED

• Flat-blade screw driver
1: DETACH THE LIGHT ASSEMBLY
USE A SCREWDRIVER TO LOOSEN THE CAPTIVE SCREW
2: PULL OUT LIGHT ASSEMBLY
PULL THE LIGHT ASSEMBLY FORWARD AND UP SO
IT LIFTS OFF THE TAB AT BASE
3: UNLOCK THE PLUG
UNSCREW PLUG COLLAR COUNTER-CLOCKWISE
UNTIL IT IS FREE SPINNING
4: DISCONNECT THE TERMINALS
DISCONNECT LIGHT ASSEMBLY FROM PLUG BY
PULLING APART
PRODUCT SUPPORT & INFORMATION
For the most up to date installation information and contact information
for assistance in your region, please visit www.spaelectrics.com
COPYRIGHT 2020 SPA ELECTRICS PTY. LTD. ALL RIGHTS RESERVED US 20201116
WINTERIZATION
INSTRUCTIONS

LIGHT REMOVAL

www.spaelectrics.com
Toll Free: 1800 708 5545
Email: info@spaelectrics.com