16-5.Indoor Unit (Setting By Simple Remote Controller) - Fujitsu ACUH07LUAS1 Design & Technical Manual

16-5. Indoor unit (setting by simple remote controller)
• The function settings of the control of the indoor unit can be changed by this procedure according
to the installation conditions. Incorrect settings can cause the indoor unit malfunction.
• After the power is turned on, perform the "Function setting" according to the installation conditions
using the remote controller.
• The settings may be selected between the following two: Function number or Setting number.
• Settings will not be changed if invalid numbers or setting numbers are selected.
• This function cannot be used on the secondary units.
¢ Preparation
Before connecting the power supply of the indoor unit, reconfirm following items:
• Piping air tightness test and vacuuming have been performed firmly.
• There is no wiring mistake. Then, connect the power supply of the indoor unit.
16-5. Indoor unit (setting by simple remote controller)
Outdoor unit
Breaker on
- 199 -
Indoor units
16. Function settings