Table of Contents
Advertisement
OPERATION DETAILS
1. Plug the cable connector into the car jump starter
• Red Light On
- The voltage of jump starter cannot support to start
- Check voltage of Jump Starter
• Red and Green Light Flash
- Please check the voltage of jump starter belong to 12V/16V
- Go to Step (2)
2. Connect the jump starter to the car battery
• Red Light on and Buzzer
- Short Circuit
- Disconnect the jump starter and car battery, go back to step 1.
• Red Light on and Buzzer
- Reverse Polarity
- Disconnect the jump starter and car battery, go back to step 1.
• Red and Green light flash within 1-35 and then the Green Light on
- Working Status
- Turn on the Key
3. Green Light On
• Red Light Flashes
- Cannot start within 30S
- If you need to repeat use, disconnect and reconnect the connector
6
Advertisement
Table of Contents
Need help?
Do you have a question about the MB3764 and is the answer not in the manual?
Questions and answers
Can I use the MB3764 to charge a 12v car battery
The PowerTech MB3764 is a 12V 850A jump starter, meaning it can provide a high current boost to start a 12V car battery. However, it is not designed to charge a 12V car battery like a traditional battery charger. It is meant to provide enough power to start the vehicle when the battery is weak or dead.
This answer is automatically generated