Qtx Mini Bubble USB User Manual

Mini Bubble USB
Bubble Machine
Item ref: 160.561UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
The QTX Mini Bubble USB is a compact yet powerful bubble machine that produces an impressive amount of
bubbles for its size. Powered safely via the included USB lead and a compatible socket (not supplied), this
lightweight unit is simple to setup and use and perfect for parties and small events. The sturdy plastic
construction and carry handle make it easy to transport or hang on a lighting rig if required.
Unpacking
Your Mini Bubble USB should reach you in good condition and should be supplied with a 2m USB power lead,
spare bubble wheel and user guide. If there are any signs of damage or items missing from the packaging,
please contact your dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the power, allow the unit to dry out and
have it checked by qualified personnel before further use. Avoid any impact, dropping or extreme pressure to
the housing. No user serviceable parts inside - do not open the case. Refer all servicing to qualified service
personnel.
Placement
The Mini Bubble USB has an upright fluid tank and should always be operated in an upright position. Choose a
position where the bubble output is facing the area to be filled. Ensure easy access to the rear panel and to
www.avsl.com 160.561UK Manual