Advertisement
Quick Links
MHS-100G
Item ref: 150.457UK
100W Spot-Wash LED Moving Head
with GOBOs
User Manual
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
A small and lightweight mini moving head that combines 1x 30W white LED with 6x 8W RGBW LED's for
the very best in effects and colour mixing. Featuring colourful washes, spots and GOBOs and auto or
sound-to-light modes, this 14 channel DMX light effect can be free standing or mounted to trussing using
the supplied brackets. Ideal for small stages, bars, nightclubs and mobile DJs the QTX MH-100 provides
dazzling performance in a compact, portable unit.
In the box:
Your MHS-100G should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com
150.457UK User Manual
Advertisement
Related Manuals for Qtx MHS-100G
Summary of Contents for Qtx MHS-100G
- Page 1 In the box: Your MHS-100G should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket, 1 x UK IEC mains lead and 1 x manual.
- Page 2 Placement: • Use the included mounting bracket to fix to a stand or lighting truss. • Use secondary safety fixings if mounting overhead. • Keep away from damp or dusty environments. • Ensure adequate airflow around the fixture housings. • Ensure adequate access to controls and connections.
- Page 3 DMX mode: The MHS-100G can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit.
- Page 4 Specifications: Power supply 110-240Vac, 50/60Hz (IEC) Power consumption 100W Fuse rating LED power 1x 30W White, 6x 8W RGBW Modes Auto, sound, master/slave, DMX512 DMX channels 14CH PAN range 540° Tilt range 270° Effects RGBW spot, wash, 7x gobos, strobe effect Dimensions 150 x 160 x 240mm Weight...