Related Manuals for Qtx GOBO DERBY
Summary of Contents for Qtx GOBO DERBY
- Page 1 GOBO DERBY 4-IN-1 LED LIGHT EFFECT Item ref: 151.603UK User Manual Version 1.0 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty...
- Page 2 Introduction Thank you for choosing the GOBO DERBY as part of your light show. This compact light effect unit is a complete DMX lighting effects solution in a single fixture with LED Derby, UV, Strobe and Laser functions, all controllable from DMX, internal or remote control.
-
Page 3: Rear Panel
DMX IN connector (XLR) Internal Settings Using the four control panel buttons (6), the GOBO DERBY can be set to various modes. Press the MENU button to display the different functions (see table below). Use the UP/DOWN arrow buttons to make your selection and press the ENTER button to confirm the selection. -
Page 4: Stand-Alone Operation
As supplied, the remote handset has a clear plastic tab inserted which should be removed to activate the CR2025 button cell. Point the handset toward the front of the GOBO DERBY unit at a range of no more than 5m for remote control. -
Page 5: Channel Description
DMX: 2 channel mode Channel Description DMX value Function 000 - 009 No function 010 - 069 Show 1: LED gobos show Control mode 070 - 129 Show 2: white LED and UV show 130 - 179 Show 3: Laser show 180 - 255 Show 4: all shows in random sequence 000 - 247... -
Page 6: Specifications
Specifications Power supply 100-240Vac, 50/60Hz (IEC) Power consumption max. Fuse T2A/250V Operating temperature 45°C max LED power 8 x 3W Derby, 2 x 3W strobe, 8 x 3W UV LED colour 2 Red, 2 Green, 2 Blue, 2 Yellow, 2 White, 8 UV Laser power 80mW Red (650nm), 30mW Green (532nm) DMX channels...