Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Qtx Azure
Summary of Contents for Qtx Azure
- Page 1 Club Style Lasers Item ref: 152.750UK & 152.755UK Azure & Emerald User Manual Stock Code Model Wavelength Laser Power 152.750UK Azure 450nm 100mW 152.755UK Emerald 532nm 50mW IMPORTANT SAFETY NOTICE Please Read this manual before operating VERSION 1.0...
- Page 2 Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing this product. Please read this manual carefully to achieve the best results from your purchase and to avoid damage through misuse.
-
Page 3: Technical Specification
1. Voltage: 100-250Vac, 50-60Hz (IEC) 2. Rated Power: 10W 3. Laser: Emerald: 50mW @532nm green laser 4. Laser: Azure: 100mW @450nm blue laser 5. Working Modes: DMX, Sound-Active, AUTO, Master-Slave. 6. DMX Control Channel: 7 channels 7. Interface: 3 pins XLR jack for DMX or Master-Slave linking. -
Page 4: Front/Rear Panel
Front/Rear Panel 1. Laser Aperture 2. Power Indicator: Red 3. Sound Active Indicator: Blue 4. Sound Active Microphone 1. IEC Power 2. Cooling Fan 3. Laser Key Switch 4. Dipswitches: Function Setting 5. DMX or Linking Jack 152.750UK & 152.755UK User Manual... - Page 5 DMX Control Parameter Chart Channel Function Value Description ～ No output from laser Sound active mode ～ Mode AUTO mode ～ ～ Static patterns of DMX mode ～ Dynamic patterns of DMX mode ～ Pattern selection 52 static/dynamic patterns ～ Position-X Adjust position (X-Axis) ～...
-
Page 6: Operation
Static Dynamic patterns Static Dynamic patterns value patterns value patterns Criss-cross Diagonal moving dot Ladder line Turning square ～ ～ Chiasma line Flexing horizontal line Tetragon 1 Turning dotted square ～ ～ Extended Flexing horizontal Tetragon 2 Turning pentagon ～ ～... -
Page 7: Master/Slave Operation
Master-Slave Operation This mode allows you to link up to 32 units together via DMX without a controller. 1. Install the unit(s) in a suitable position. 2. Choose a unit to function as master mode, set the dipswitch to select sound activated or AUTO mode. 3. -
Page 8: Function Setting
Function Setting To assign the function of the unit please use the Dipswitch chart, the functions are as follows; DMX/slave, sound activated and AUTO mode. Each dipswitch represents a binary value and changing the dipswitches changes the final value. Dipswitch #10 is used to set the master or slave mode. Within the master modes there are sound activated mode and AUTO mode. - Page 9 DMX Address Chart This chart shows the DMX dipswitch table for setting a DMX address from 1- 511. Please follow the table below to configure future dipswitches with your required DMX address. DipSwitch Position DipSwitch Position DMX Address Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.