Step 2: Connect To Pc; Step 3: Configure Inputs - Thor Broadcast H-16ATSC-IP Quick Setup Manual

Step 2: CONNECT TO PC

NMS Port
Connect the NMS port to your PC using an ethernet cable
Open web browser and go to http://192.168.0.136
Login/Password: admin/admin

Step 3: CONFIGURE INPUTS

SELECT "TUNER INPUT" FROM THE MAIN MENU
CLICK "EDIT"
ENTER THE DESIRED
FREQUENCY FOR THE
APPROPRIATE CHANNEL
(SEE ATSC FREQUENCY CHART)
CLICK SET TO SAVE
You should now see signal quality/strength information, the link light will go
green, and show your bitrate. Repeat these steps as needed for the rest of the
channels.