ADVANCED SIMRACING ASR Kart Assembly And User's Manual page 7

4.
Loosely assemble the rubber
feet with the M6 X 20 screw
and M6 T-Nut.
4X
5.
Slide the rubber feet through the bottom slot on the 3" X 50" Extrusions and
place at least 1" from the end. Tighten fully.
6.
Assemble 4 X M8 X 16 Socket screws and 4X M8 T-Nuts on the pedal tray
sides. Screw in the T-Nuts no more than a turn.
5