Important Safety Information; Operation Environment - multicomp pro MP711005 User Manual

Function
Slave Address
Code
01H 01H
01H 05H
01H 03H
01H 010H

Important Safety Information

Please read these instructions carefully before use and retain for future reference.
The following safety symbols may appear in this manual or on the series:
• Do not block or obstruct the opening to the cooling fan vent.
• Avoid severe impacts or rough handling as it could lead to damage.
• Do not discharge static electricity.
• Do not disassemble unless you are qualified as service personnel.
AC Input
• AC input voltage: 110V/120V/220V / 230V, 50/60Hz.
• Connect the protective grounding conductor of the AC power cord to an earth ground, in order to avoid electrical shock.

Operation Environment

Location
Relative Humidity
Altitude
Temperature
Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro
The lower computer responds
Data length
(N+7)/8 -8bit
set an address
FF00H -16bit
0001H -16bit
2N - Bbit
Starting and N-number of
ending addresses writing addresses
-16bit -16bit
Indoor, no direct sunlight, dust free, almost non-conductive
<80%
<2000m
0-40°C
Data CRCL
XXH
XXH
2N data
Page <2>
CRCH Instructions
Address:0000H-BIT0
0001H-BIT1......
Return the commands of upper
computer
Function: return the data value
XXH
to be read Data: a data integer
of 16-bit floating-point
Function: return function
code,start address: address
length
08/03/24 V1.0