Download Print this page
POSIFLEX PS-3216A-G2 User Manual
POSIFLEX PS-3216A-G2 User Manual

POSIFLEX PS-3216A-G2 User Manual

Fanless lcd touch terminal

Advertisement

Quick Links

PS-3216A-G2
Fanless LCD Touch Terminal
User Manual
Package Contents
Fanless LCD touch terminal...................................................(x1)
Power adaptor...................................................................(x1)
Power cord...........................................................................(x1)
FCC NOTES
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
CE CLASS A WARNING
This equipment is compliant with Class A of CISPR 32. In a residential environment this
equipment may cause radio interference.
AVERTISSEMENT CE CLASSE A
Cet équipement est conforme à la classe A de CISPR 32. Dans un environnement
résidentiel, cet équipement peut provoquer des interférences radio.
WARRANTY LIMITS
Warranty will terminate automatically when the machine is opened by any person other than
the authorized technicians. The user should consult his/her dealer for the problem happening.
Warranty voids if the user does not follow the instructions in application of this merchandise.
The manufacturer is by no means responsible for any damage or hazard caused by improper
application.
LIMITES DE GARANTIE
La garantie prend fin automatiquement lorsque la machine est ouverte par une personne
autre que les techniciens autorisés. L'utilisateur doit consulter son revendeur pour le
problème qui se produit. La garantie s'annule si l'utilisateur ne suit pas les instructions
d'application de cette marchandise. Le fabricant n'est en aucun cas responsable de tout
dommage ou danger causé par une mauvaise application.
PS-3216A-G2 Ver. A0
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the PS-3216A-G2 and is the answer not in the manual?

Questions and answers

Summary of Contents for POSIFLEX PS-3216A-G2

  • Page 1 L'utilisateur doit consulter son revendeur pour le problème qui se produit. La garantie s'annule si l'utilisateur ne suit pas les instructions d'application de cette marchandise. Le fabricant n'est en aucun cas responsable de tout dommage ou danger causé par une mauvaise application. PS-3216A-G2 Ver. A0...
  • Page 2 警告 為避免電磁干擾,本產品不應安裝或使用於住宅環境。 SAFETY INSTRUCTIONS This equipment is not suitable for use in locations where children are likely to be present. CONSIGNES DE SÉ CURITÉ Cet équipement ne convient pas à une utilisation dans des lieux pouvant accueillir des enfants. WARNING Power cord shall be connected to a socket-outlet with earthing connection ATTENTION Le cordon d'alimentation doit être connecté...
  • Page 3 Views of the PS-3216A-G2 Front View P-CAP Touch Panel LED Indicator Gen 7 Base Rear View Rear I/O Cover Display Screw Hole Hinge for LCD Neck Cover Cable Cover Cable Exit Left Side View Right Side View Power Button Brightness Adjustment Button “+”...
  • Page 4 Bottom View Bottom I/O Cover View of I/O Interface Top I/O Ports 12V DC-OUT Power Jack USB 2.0 Port (for Second Display) HDMI Port ※ The top I/O ports are provided for COM-based and USB-based peripheral devices, for example, customer display. Bottom I/O Ports 12VDC-IN Power Jack Cash Drawer Port...
  • Page 5 Before operating this terminal, unfold it and make this terminal rise in operation mode by referring to the following steps. Here, an equivalent model with GEN 7 base is taken below for example. 1. Firstly, lift this terminal gently to make it to be unfolded.
  • Page 6 5. Remove the cable cover from the base. 6. Fix the base with two #/6/32 screws. 7. Push the cable cover back to the base. Terminal from operation mode to shipping mode To fold this terminal, refer to the following steps. Here, an equivalent model with GEN 7 base is taken below for example.
  • Page 7 3. Carefully hold the lower rim of the display. 4. Push the base-folding lever in the direction as indicated by the arrow below (1). Then, the display will be loosen and go down (2). 5. When the display goes down to a degree, loose the base-folding lever, as shown in the direction as indicated by the arrow below.
  • Page 8 7. Put back the cable cover. Installing Optional Upgrade Kits and Peripherals PS-3216A-G2 can work with multiple optional upgrade kits and peripheral devices, such as magnetic stripe reader (MSR), LCD monitor, cash drawer and the like. Before installing an optional upgrade kit and/or peripheral device, make sure...
  • Page 9 2. Pull out the cable cover. Pull out 3. Push and tilt the terminal to the end in the direction as shown by the arrow. Then determine that the terminal is tilted to the end, as shown in the right figure. 4.
  • Page 10 6. Tilt the terminal slightly at a little angle in the direction as shown by the arrow, making cables easily pass through the cable passage. Cable Passage 7. Make the connector, which will be connected to the I/O port of the terminal, pass through the cable passage of base stand.
  • Page 11 10. Connect the connector of the power adapter to the 12VDC-IN power jack. 11. Cover the bottom I/O interface and gather the I/O cables to the circled cable arrangement area, as shown below. 12. Push and tilt the terminal to the end in the direction as shown by the arrow.
  • Page 12 Le cordon d'alimentation doit être connecté à une prise de courant avec mise à la terre. Powering ON the PS-3216A-G2 After connecting the power cable to the power jack of the terminal, press the power button to power on the terminal. To power it off, press the power button again.
  • Page 13: Power Led Indicator

    If the system hangs due to a reason, such as software resource conflict, please press and hold the power button for over 10 seconds to forcedly shut down the system. Power LED Indicator LED status indicator, which is located at the lower right side of the LCD panel, is mainly responsible for notifying users of the current system status by emitting various LED signals.
  • Page 14 -20°C - 70°C, 10%RH - 90%RH Condition Regulation Regulatory FCC/CE/LVD Rules ※ The product information and specifications are subject to change without prior notice. To get the detailed information on the PS-3216A-G2, please contact your dealer or the service team...