Operation; Start And Stop; Operating; Starting A Cut - Atlas Copco Techbud TEX 20PS Safety And Operating Instructions Manual

TEX 20PS, 21PE, 32P/PS, 33PE, 39P/PS, 40PE, P60/S,
P90/S

Operation

WARNING Involuntary start
Involuntary start of the machine may cause injury.
Keep your hands away from the start and stop
►
device until you are ready to start the machine.
► Learn how the machine is switched off in the event
of an emergency.
► Stop the machine immediately in all cases of
power supply interruption.
© 2014 Construction Tools PC AB | No. 9800 0650 90c | 2014-07-03
Original instructions
Safety and operating instructions

Start and stop

Start the pneumatic breaker by pressing down the
start and stop device.
Stop the pneumatic breaker by releasing the start
and stop device. The start and stop device will
automatically return to the stop position.

Operating

Starting a cut

Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
Start collaring at such a distance from the edge
♦
that the machine is capable of breaking the
material without levering.
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool does
not get stuck.
A
17