Safety Precautions - Infineon EVAL TDA38826 1VOUT User Manual

EVAL_TDA38826_1VOUT user guide
User guide for TDA38826 evaluation board

Safety precautions

Safety precautions
Note: Please note the following warnings regarding the hazards associated with development
systems
Table 1 Safety precautions
User Guide
Caution: The heat sink and device surfaces of the evaluation or reference
board may become hot during testing. Hence, necessary precautions are
required while handling the board. Failure to comply may cause injury.
Caution: The evaluation or reference board contains parts and assemblies
sensitive to electrostatic discharge (ESD). Electrostatic control precautions are
required when installing, testing, servicing or repairing the assembly.
Component damage may result if ESD control procedures are not followed. If
you are not familiar with electrostatic control procedures, refer to the applicable
ESD protection handbooks and guidelines.
3 V 1.0
2023-07-21