Storage Configuration - ASROCK H55 EXTREME3 User Manual

3.4.4 Storage Configuration

3.4.4 3.4.4 Storage Configuration Storage Configuration Storage Configuration
3.4.4 3.4.4 Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
SATA Operation Mode
SATAII 1,2,3,4 Configuration
SATAII 5,6 Configuration
Marvell SATA3 Operation Mode
Compatible Mode
SATAII_0
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
Marvell SATA3_1
Marvell SATA3_2/eSATA3_1
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
SATA Operation Mode
Use this to select SATA Operation Mode. Configuration options: [IDE], [AHCI]
and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options "SATAII 1,2,3,4 Configuration" and
"SATAII 5,6 Configuration" will appear.
If you select [AHCI] mode, the options "Hot Plug" and "Link Power Manage-
ment" will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Marvell SATA3 Operation Mode
Use this item to select Marvell SATA3 operation mode. Configuration
mode: [IDE] and [AHCI]. The default value is [IDE].
Compatible Mode
Use this item to select Marvell SATA3 compatible mode. The default value
is [Auto].
Options
[IDE]
IDE
[Compatible]
AHCI
[Enhanced]
Disabled
[IDE]
[Auto]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen Select Screen
[Not Detected]
Select Item Select Item
[Not Detected]
+- +- Change Option Change Option
[Not Detected]
F1 General Help
F1 General Help
[Not Detected]
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
5 0 5 0 5 0
5 0 5 0