Advertisement
Quick Links
TABLE TOP/DESK
WITH SWIVEL MOUNT
Assembly Guide
IMPORTANT: As there are different versions of each rig depending on your
region, please ensure that you are using the correct instruction set. The
part number below should match the part number labeled on your box
TR80-SHELF4-BLK
Published 2022‑12‑19
1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TRAK RACER TR80-SHELF4-BLK
Summary of Contents for TRAK RACER TR80-SHELF4-BLK
- Page 1 Assembly Guide IMPORTANT: As there are different versions of each rig depending on your region, please ensure that you are using the correct instruction set. The part number below should match the part number labeled on your box TR80-SHELF4-BLK Published 2022‑12‑19...
- Page 2 TABLE OF CONTENTS Part list Symbol Legend Assembly Notes TR80-SHELF4-BLK Assembly Instructions...
- Page 3 IMPORTANT: As there are different versions of each rig depending on your region, please ensure that you are using the correct instruction set. The part number below should match the part number labeled on your box TR120-BLK PARTS LIST Part # Description Check AJ-4040...
- Page 4 Two people needed Tighten hardware Leave hardware loose for adjustment Make Adjustment Break tab off Corner bracket CB1 Safety glasses needed Attention / Priority Reserve for following step Mirrored Components (Same on both sides)
- Page 5 NOTE...
- Page 6 The handle screws (SL-M8-20) are ratcheted to NOTE allow for tightening and loosening when space for rotation is limited. Simply pull the handle out and turn handle into position and push handle back in to engage thread.
- Page 7 NOTE N2 & N3 It is strongly advised that spring T-Nuts (N3) are inserted by sliding from the ends of profiles. Please take careful note of each step of all T-nuts as some are to be installed in anticipation of future steps. If T-Nuts are skipped, and the ends are no longer accessible, they can be...
- Page 8 NOTE...
- Page 9 M8x25mm AT-40-200 AT-40-240 NB-M8 SH-M8-25 WL-M8 WF-M8 Using an end cap to measure, align the top of 240mm with top of the end cap (5mm) M8x16mm AJ-4040 SH-M8-16 NB-M8...
- Page 10 M8x16mm SH-M8-16 NB-M8 M8x20mm NB-M8 AT-40-630 BS-KB SH-M8-20 WL-M8 WF-M8...
- Page 11 M8x16mm SL-M8-20 SH-M8-16 NB-M8 WL-M8 WF-M8 M8x12mm NB-M8 KB-TR-FL SF-M8-12...
- Page 12 EC-40 EC-40...
- Page 13 M8x16mm BA-40-BLK SH-M8-16 NB-M8 OPTIONAL: Add BA-40-BLK as extra support if required...
- Page 15 FINISHED Share your build online and tag us to be featured! @trakracer @trakracer @trak_racer...
Need help?
Do you have a question about the TR80-SHELF4-BLK and is the answer not in the manual?
Questions and answers