Eps Status Inquiry And Functions Setup - CyberPower CPS3000PIE User Manual

6. SILENT MODE Icon: This icon illuminates whenever the EPS is in silent mode. The
buzzer will not beep during the battery mode until the battery reaches low capacity.
7. OVER LOAD Icon: This icon will illuminate and an alarm will sound to indicate the battery
supplied outlets are overloaded. To clear the overload, unplug some of your equipment from
the battery supplied outlets until the icon is no longer illuminated and the alarm stops.
8. FAULT MODE Icon: This icon illuminates if there is a problem with the EPS. Please
contact CyberPower Systems for further help and support.
9. BATTERY CAPACITY Meter: This meter displays the approximate charge level (in 20%
increments) of the EPS's external battery. During a blackout or severe brownout, the EPS
will switch to battery power, the ON BAT icon will be illuminated, and the charge level will
decrease.
10. LOAD CAPACITY Meter:This meter displays the approximate output load level (in 20%
increments) of the EPS's battery outlets.

EPS Status Inquiry and Functions Setup

1. General Mode
a. Press the "Display" button to check the status of the EPS
b. Press and hold the Display toggle for 4 seconds,
If the machine is in the Battery Mode, it enters the
status of Mute.
If the machine is in the Line Mode, it proceeds Self
Test.
c. If the Display toggle remains untouched for over 30
seconds, the LCD backlight will turn off automatically.
Item
1 Input Voltage
2 Output Voltage
3 Output Frequency
4 Load
5 Load Capacity
6 Battery Capacity
7 Centigrade
8 Fahrenheit
Unit
Kw
9
CPS3000PIE
V
V
Hz
%
%
℃
℉