Eps Status Inquiry And Functions Setup; General Mode; Set-Up Mode - CyberPower CPS3500PIE User Manual

CyberPower Systems for further help and support.
10. BATTERY CAPACITY Meter: This meter displays the approximate charge level (in 20% increments)
of the EPS's external battery. During a blackout or severe brownout, the EPS will switch to battery power,
the ON BAT icon will be illuminated, and the charge level will decrease.
11. LOAD CAPACITY Meter: This meter displays the approximate output load level (in 20% increments)
of the EPS's battery outlets.

EPS Status Inquiry and Functions Setup

EPS status inquiry and functions setup

1. General Mode

a. Press the "Display" button to check the status of the EPS.
b. Press and hold the Display toggle for 4 seconds.
If the machine is in the Battery Mode, it enters the status of Mute.
If the machine is in the Line Mode, it proceeds to Self Test.
c. If the Display toggle remains untouched for over 30 seconds, the LCD backlight will turn off
automatically.

2. Set-up Mode

Step 1: The machine enters Set-Up Mode after holding the Display toggle for 10 second Icon
4,5,6,7,8,9 lights indicate that Set-Up Mode.
Step 2: By pressing the Display toggle, users can switch between setup functions. User configurable
functions are as follows:
a. Delay Time: The time delay between switching from Battery Mode to Line Mode. There are 9
different settings. The default setting is 2.0 minutes.
Function description: The machine will switch from Battery Mode to Line Mode after the AC
power transmission reaches stability within the preset delay time.
b. Battery AH: The function adjusts the battery charging current according to the capacity of the
connected batteries. It can be configured for 50, 100, 150 and 200AH.The default
11
Item
Input Voltage
Output Voltage
Output Frequency
Load
Load Capacity
Battery Capacity
Centigrade
Fahrenheit
Copyright © 2009 CyberPower Systems, Inc.
CPS3500&CPS5000 Series
Unit
V
V
Hz
Kw
%
%
℃
℉