Replacing The Battery - CyberPower CPS3000PIE User Manual

6. If the battery box or the battery
connection has a switch, please turn
it on first.
7. Turn on the BATTERY SW. on the
back of the machine (Step 5)
8. Make the AC input connection and turn on the Power Switch on the front panel. The
Power On Indicator and the LCD Module Display will blink 4 times. Press the Display
toggle (Selected Switch) once. The output voltage showing on the LCD Module Display
should be 220V. This completes the start-up process. (Step 6)
9. Press and hold the Display toggle switch for 4 seconds. The machine will begin a self test
and enter Battery Mode for 6 seconds before returning to Line Mode. Correct any issues
that may be present before continuing. See the Definitions for illuminated LCD on page 7
for a list of alarm code definitions.
10. After ensuring the machine works normally, reassemble the back cover. The installation
is now complete.
11. When the external battery needs to be maintained or replaced remember to turn the
machine off. Once off, remove the AC power source and switch off the BATTERY SW.
before maintenance or replacing the batteries. When the work is complete, please start
from Step 3 to re-install the machine.
CAUTION!
Read and follow the IMPORTANT SAFETY INSTRUCTIONS before
servicing the battery. Battery service should only be done by qualified professionals.
CAUTION!
Use only the specified type and number of external batteries. Please see the
technical specifications for replacement batteries.
CAUTION!
The battery may present a risk of electrical shock. Do not dispose of
battery in a fire as it may explode. Follow all local ordinances regarding proper disposal of
batteries. Most retailers that sell lead-acid batteries collect used batteries for recycling.
CAUTION!
Do not open or mutilate the batteries. Released electrolyte is harmful to skin
and eyes and may be toxic.

REPLACING THE BATTERY

7
CPS3000PIE
Step 5 Step 6