Table of Contents
Advertisement
Configure ODP mode
AT+QGPSCFG="odpcontrol"[,<odpcon
trol>]
Configure DPO
AT+QGPSCFG="dpoenable"[,<dpoena
ble>]
Configure GPS plane
AT+QGPSCFG="plane"[,<plane>]
Reference
Parameter
<outport>
EC20_GNSS_AT_Commands_Manual
Response
When there are two parameters:
OK
If error is related to ME functionality:
+CME ERROR: <errcode>
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "odpcontrol",<odpcontrol>
OK
Response
When there are two parameters:
OK
If error is related to ME functionality:
+CME ERROR: <errcode>
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "dpoenable",<dpoenable>
OK
Response
When there are two parameters:
OK
If error is related to ME functionality:
+CME ERROR: <errcode>
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "plane",<plane>
OK
Configure the output port of NMEA sentences, and the setting will be auto
saved to NVRAM.
"none"
Close NMEA sentence outputting
EC20 GNSS AT Commands Manual
Confidential / Released
LTE Module Series
11 / 26
Advertisement
Table of Contents
Need help?
Do you have a question about the EC20 GNSS and is the answer not in the manual?