Advertisement

S T I C K V A C
S V 6
Scan QR to activate your warranty, access support
content, purchase accessories and more!
Owner's Guide
Model iHSV6-WHT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the STICK VAC SV6 and is the answer not in the manual?

Questions and answers

Sharon Mason
February 12, 2025

I have an iHSV6-WHT and it shuts down on me seconds after I start it. The canister is emptied after every use. The red light right below the SV6 comes on after seconds and it shuts down. Battery was charged into the adapter for the last few days. What could be the issue?

1 comments:
Mr. Anderson
February 12, 2025

If the iHome STICK VAC SV6 shuts down seconds after starting with the red light coming on, it could indicate a low battery or a blockage in the vacuum. Try fully charging the battery before use. Also, check for clogs in the dust bin, filter, or brush roll and clean them if necessary.

This answer is automatically generated

Summary of Contents for iHome STICK VAC SV6

  • Page 1 S T I C K V A C S V 6 Scan QR to activate your warranty, access support content, purchase accessories and more! Owner’s Guide Model iHSV6-WHT...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Safety Product Overview 3 - 4 Getting Started Using your Vacuum 6 - 8 Maintenance Troubleshooting Warranty Questions? Contact Customer Service Web/Email: iHomeclean.com Phone: 877-370-4580...
  • Page 3: Safety

    SAFETY SAFETY DEFINITIONS WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury. CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage. Before using this product, please read the following safety instructions and follow all safety precautions.
  • Page 4: Product Overview

    PRODUCT OVERVIEW Rechargeable Battery Handle Turn ON/OFF Button 4. Suction Control Button Dustbin Housing Release Button Outlet Filter Dustbin Canister Cover Latch Tube Release Metal Tube 10. Floor Brush Release 11. Motorized Floor Brush 12. Power Adapter 13. Wall Mount Bracket/Tube Holder 14.
  • Page 5: Getting Started

    GETTING STARTED Vacuum Assembly The SV6 can be used in handheld or stick configuration. Follow the steps below for stick assembly. A: Tube Installation: Insert tube until you hear a click. B: Brush Installation: Insert brush until you hear a click. C: Battery Installation: Align the battery to the grooves as shown and slide until you hear a click.
  • Page 6 GETTING STARTED Installing the wall-mount 1: Determine the best wall location for mounting the dock. Be sure an outlet is nearby to connect the power cable. 2: For your convenience, self-adhesive tape is fixed onto the back of the wall mount. (Note: using the tape may damage the surface of your wall if ever removed).
  • Page 7: Using Your Vacuum

    USING YOUR VACUUM Operation Note: Designed for indoor use. Do not vacuum liquids. 1: Please fully charge your battery (up to 4-5hrs) before first use for optimal performance. 2: To turn on your vacuum press the Power Button. 3: Toggle between ECO and MAX suction. (Note: Battery life decreases more rapidly using MAX mode). Questions? Contact Customer Service Web/Email: iHomeclean.com Phone: 877-370-4580...
  • Page 8 MAINTENANCE Cleaning Dustbin and Filters Note: Empty your dustbin and clean filters regularly to ensure optimal performance. One touch to empty Disassemble and Cleaning 1. Press the tube release button, remove the stick from the main unit of the vacuum. 2.
  • Page 9: Maintenance

    MAINTENANCE Cleaning Dustbin and Filters Note: Empty your dustbin and clean filters regularly to ensure optimal performance. Reinstall the Dustbin 5. When installing the dustbin, please align the lock first, and then press the front end of the dustbin to install the component. Push the outlet HEPA back into the Replace the HEPA housing and turn main unit after cleaning.
  • Page 10 MAINTENANCE Cleaning the Floor Brush 1: Remove the brush from the tube by pressing the release button and pulling apart. 2: Slide the release tab at the side of the floor brush to release the floor brush from its housing. 3: Remove the brushroll by sliding up and out.
  • Page 11: Troubleshooting

    TROUBLESHOOTING PROBLEM CAUSE SOLUTION Vacuum does not power on Battery is depleted. Charge the Battery. Battery is still connected to the Disconnect the battery from the adapter or remove vacuum from the adapter or vacuum is on the charging mount. charging mount (standy mode).
  • Page 12: Warranty

    WARRANTY The One (1) Year Limited Warranty applies to purchases made from authorized retailers of Silver Point Innovations LLC. War- ranty coverage applies to the original owner and to the original product only and is not transferable. We recommend register- ing your product online at www.ihomeclean.com SilverPoint warrants this product to be free from defects in workmanship and materials, under normal household use and conditions, one (1) year from the date of original purchase and maintained according to the requirements outlined in this User...

This manual is also suitable for:

Ihsv6-wht

Table of Contents

Save PDF