Electrical Requirements; Set Up - Labtech DIGIBLOCK ED-S Series User Manual

Electrical Requirements

The unit provides extra protection against the risk of electrical shock by grounding appropriate metal parts. The
extra protection may not function unless the power cord is connected to a properly grounded socket. It is the
user's responsibility to assure a proper ground connection is provided.
The following power options are available:
The unit is supplied with a European power cable. It is used to relate to power supply. Plug the cord into socket
and plug in rear into electric socket of the unit. Then the unit is ready to be used.

Set Up

Step 1: open the package and take out the unit. Place it on a stable laboratory bench. Handle the unit
carefully to avoid bumping it. The laboratory bench should be stable, reliable and with no vibrations.
Step 2: connect the power supply cord. Take care the power switch is on the "O" position before connecting
the power supply cord.
Step 3: after the power supply cord is properly connected, switch ON the unit.
Optimized design has significantly improved the performance depending on installation conditions of the unit.
Adequately selected installation environment will certainly be helpful to ensure longer service life and more
efficient performance.
www.labtechsrl.com
DigiBlock – User Manual
Page 13 of 25