Main Interface - Labtech DIGIBLOCK ED-S Series User Manual

Main Interface - iTouch Screen
1. Real -T °C: actual temperature.
2. SetTemp °C：temperature setpoint of running heating step.
3. Power %: Output power percentage.
4. Curves: Switch to heating graph page.
5. Setup: Switch to method setup page.
6. Step A/B: A means the running step no. B means the total step no. in a method.
7. Time A/B: A means actual running time of current heating step. (
8. Total: Total running time of the method.
Method running status display.
9.
10. Ext. Temp: Display the external temperature (
11. Run: Start selected method, once press Run, botton Stop appear for abort the method.
12. Pause: Pause running method.
external sensor will be needed
www.labtechsrl.com
DigiBlock – User Manual
B means set time of current heating step)
)
Page 17 of 25