Subscribe to Our Youtube Channel
Related Manuals for activeshop 0100.4360
Summary of Contents for activeshop 0100.4360
- Page 1 INSTRUCTIONS FOR USE COSMETIC MILLING MACHINE CLASSIC FILE WITH ABSORBER Model 0100.4360 Importer: ACTIVESHOP Ltd. 8b Graniczna St., building DC2A 54-610 Wroclaw, Poland www.activeshop.com.pl Rev. A/05/2024...
- Page 2 This device is designed and constructed in accordance with the Medical Equipment Directive 93/42/EEC. The milling machine is intended for use only by qualified manicurists and pedicurists. The device is not intended for treatments other than manicure / pedicure. Figure 1: Front of the milling machine Figure 2: Back of the milling machine 1.
- Page 3 Before proceeding: Carefully read the instructions. Make sure that the device has not been damaged during transportation. Keep the unit's packaging for future service repairs. Do not u s e the device if: the power cord or plug is damaged the device is damaged or has been dropped device is not functioning properly a clean filter bag is not installed in the device...
- Page 4 Speed controller (5) to the maximum position. When the foot is removed from the switch or f o o t control, the cutter head and suction pump will s t o p . Head micromotor overload protection: If the motor is blocked or overloaded for about 5 seconds, the electronic protection system of the Overload will cut off the power supply which will cause the device to stop working.
- Page 5 4. Once the motor has been properly attached to the housing, make sure that the suction line connector is correctly positioned, so that no damage is caused when the operation of joining the two parts. (photos 8 - 10) Spindle cleaning: If any impurities including scraps of machined materials accumulate in the spindle and do not will allow the tool to be firmly attached or fully inserted, the spindle should be cleaned.
-
Page 6: Security Measures
At the end of their useful life, as well as old appliances contain full-value recyclable components, so they should be handed over for recycling. Therefore, they should be handed over to appropriate collection points, as well as they can also be handed over to ACTIVESHOP Ltd. STORAGE AND TRANSPORT The device should be transported at a temperature of (-) 20 °C to (+) 50 °C only in its original... - Page 7 Relative temperature of no more than 75%. Operating temperature from (+) 10 °C to (+) 40 °C. During the storage and transportation processes, the device must not be thrown or dropped, exposed to mechanical shock or weathering.
Need help?
Do you have a question about the 0100.4360 and is the answer not in the manual?
Questions and answers