Checking Ladder Programs; Program Check; Display Check - Omron ZEN-SOFT01-V4 - 12-2008 Operation Manual

Checking Ladder Programs

2-3

Checking Ladder Programs

2-3-1

Program Check

Note For details on error messages during program checking,
2-3-2

Display Check

Note Up to 63 characters can be entered for a rung comment.
Select ZEN(Z)/Program Check from the Menu Bar and check the
program. The following dialog box will be displayed if the program
check was completed without finding any errors.
refer to 6-2 Program Check Errors and Warnings.
Select ZEN(Z)/Display Check from the Menu Bar, and then use the
Display Check Dialog Box to check the display contents for the
display bits D0 to Df that are used in the program. The contents of
Enter rung comment.
Rung comment
is displayed.
Section 2-3
23