Omron WIRED REMOTE I-O System Manual page 84

This section covers functions, procedures, and operational differences that are relevant when errors occur in your system.
The table of Section 7-1 provides easy reference to indicator functions, error causes, and appropriate corrective measures.
Section 7-2 shows how to monitor errors through SR words and the Programming Console. The procedures used to locate
transmission errors are outlined in Section 7-3, while Section 7-4 provides two tables that illustrate operational differ-
ences when errors occur in CONTINUE and STOP modes. Finally, Section 7-5 gives three possible methods to achieve
system recovery for errors in STOP mode.
7-1 Self-Diagnosis
7-2 Error Codes and Monitoring
7-3 Locating Transmission Errors
7-4 CONTINUE and STOP Mode Operation
7-5 Recovery in STOP Mode
7-6 I/O Table Creation Problems
7-7 Slave Unit Numbers with Multiple Terminators
7-7-1 Applicable Products
7-7-2 Notification Method for Multiple Terminators
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 7
Error Processing
76
81
91
92
95
95
95
95
96
75