Revision History - Omron WIRED REMOTE I-O System Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
2 November 1989
4 September 1990
4A January 1995
5 July 1997
6 June 1999
7 May 2000
08 April 2003

Revision History

Cat. No. W120-E1-08
Date
Complete reorganization and rewrite.
C200H Slave Backplanes added.
I/O Terminals added.
Minor additions to pages 70, 93, and 95.
Definition of Remote Terminals changed.
Minor additions to pages 70, 93, and 95.
Pages 68, 69: Minimum and maximum response times computations cor-
rected.
Pages 16, 37: Caution added.
Page 8: CPU Rack models added to the diagram.
Page 9: PC models added to the table in Maximum Number of Connectable
Remote I/O Units. Note rewritten.
Page 23: CPU Unit models added to the diagram.
Page 52: Changes to Terminator Selector and DIP Switch.
Pages 57, 58: Changes and additions made to the C200H Rack information.
Page 63: C500 Slave location corrected in the bottom diagram.
Pages 65, 66: Wiring precautions added.
Precautions section added before Section 1.
Pages 16, 39: Additional information related to CVM1/CV500/CV1000/CV2000
added to Caution.
Page 60: Power Supply Wiring Precautions added to 5-1-5 Link Adapters.
Page 65: Terminal dimensions added.
Pages 77, 79: Error messages corrected.
Changes were made on the following pages.
Page 14: Note added to "Mounting Locations."
Pages 46, 51, 77, 79: References added.
Pages 65, 66: Minor changes to graphics.
Page 84: Minor change to top paragraph.
Page 95: Subsection on duplicated terminator settings added.
Appendix C added.
Page xv: Information on EC Directives added to the PLP section.
Revision code
Revised content
121