Maintenance - Omron V400-H111 User Manual

Appendices

Maintenance

Handling the Handheld 2D Code Reader
• Do not touch the lens or monitor with your fingers or any pointed object.
• Do not use the Handheld 2D Code Reader in locations subject to dust or other
contaminants.
Inspection
To maintain the Handheld 2D Code Reader in optimum condition, perform the following
inspections regularly.
• Use a lens cloth or air brush to clean the lens and monitor.
• Use a soft cloth to clean other parts of the Handheld 2D Code Reader.
Inspection items
Power supply
Ambient operating
temperature
Ambient operating
humidity
• Turn OFF the power and take safety precautions before conducting maintenance or inspections.
• Do not use thinners or benzene to clean the Controller.
V400-H111/211
78
User's Manual
The voltage measured at the power supply terminals on the
terminal block must be 5 VDC ± 10%.
The ambient operating temperature must be between 0 and 40 °C.
The ambient operating humidity must be between 35% and 85%.
Details Required tools
Multimeter
Thermometer
Hygrometer